Periodic maintenance and adjustment
Replacing the headlight bulb
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
6
cohol or thinner.
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
1. Do not touch the glass part of the bulb.
1. Remove the headlight unit side
covers by removing the bolts on
each side.
EAU46813
ECA10651
1. Headlight unit side cover
2. Bolt
2. Remove the multi-function meter
unit bolts, and then lift up the me-
ter to unhook its projections from
the slots in the meter stay.
1
1. Multi-function meter unit
2. Bolt
1. Projection
2. Slot
3. Remove the headlight unit by re-
moving the bolts.
6-36
1
1
2 2
2
1
2
Need help?
Do you have a question about the XJ6 and is the answer not in the manual?
Questions and answers