Engine Oil - Yamaha WARRIOR YFM350XS Owner's Manual

1. Dipstick
3. Minimum level mark
1. Jauge
3. Repère de niveau minimum
1. Varilla
3. Marca de nivel mínimo
2. Maximum level mark
2. Repère de niveau maximum
2. Marca de nivel máximo

Engine oil

Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes, and
then stop it.
3. Remove the engine oil filler cap, and then
wipe the dipstick off with a clean rag. Insert
the dipstick in the filler hole without screwing
it in.
NOTE:
_
Wait a few minutes until the oil level settles before
checking.
_
4. Remove the dipstick, and then check the oil
level.
NOTE:
_
The oil level should be between the maximum and
minimum level marks.
_
8-15
EBU01181