Interrupting A Program - Miele PG 8527 Operating Instructions Manual

Interrupting a program

A program can only be interrupted
or cancelled in operating levels B
and D.
If the door must be opened for urgent
reasons, e. g., if items are moving
around too much, or the cleaning
performance needs to be checked
(deliberate intervention):
If a program with process statement
is interrupted and then continued,
make sure to check the display
upon program completion. If the
Process parameters
display reads
not achieved
, the door was opened
after process parameter monitoring
began, and so the process
parameter was not achieved. The
program may need to be repeated.
In operating levels B or D
^ Press the +C button.
The program is interrupted.
The following prompts appear in the
display:
Cancel programme (OK)
or continue (Clear)?
^ Open the door a
Note PG 8528:
Which door of the washer-disinfector
can be opened depends on which
setting has been programmed under
"Machine function/Door mechanism"
(see the Programming Manual).
The door on the unclean side of the
washer-disinfector can always be
opened, no matter which parameter
has been set.
The door on the clean side can only be
opened if one of the following
parameters are set:
- Interlock,
- Door clean + Interlock,
- Door unclean + Interlock.
,
When using the
washer-disinfector as a medical
device (as per EN ISO 15883,
CAN/CSA Z.15883), the door
interlock function should be off.
,
Caution! Items in the machine
may be hot. There is danger of
burning or scalding.
In programs with thermochemical
disinfection, steam containing high
levels of disinfectant can escape!
^ Arrange items securely. Take all
necessary infection control measures
and wear gloves.
^ Close the door a.
^ Press the +C button.
The program continues.
Operation
49