Disassembly For Repair - Kenwood DV-6050 Service Manual

1. How to open the tray if it does not come out.
1. Remove the plastic plate.
2. Turn the gear fully CCW using a flat driver and so on in
the drawing through the hole on the loading chassis bot-
tom.
3. Pull out the tray frontward by hand when it comes just
out.
Disassembling and Assembling the DVD mechanism, DVD B'D and OUT B'D FTMS for Video Sig-
nal Adjustment
1. To release the rear panel, remove screws (1x9)and optical cap.
2. Remove screws (2x2) and OUT B'D FTMS.
3. Remove connectors (3X3), power switch lever and screws (4x4).

DISASSEMBLY FOR REPAIR

Fig. 1
N314
4
3
3
3
POWER
SWITCH
LEVER
4
DV-6050
1
x9
2
x2
N315
N312
4
4
Fig. 2 3