Hitachi CG 18DSDL Handling Instructions Manual page 52

English
Symptom
Tool Does not
operate.
Goes on,
but soon
stops.
Strong
vibrations
Possible
cause
The lock To prevent accidents from incorrect
lever was not operation, the lock lever must be
pressed when pressed while the lever is pulled back to
the lever was start the motor.
pulled back. Hold the handle from above and press
the lock lever while pulling the handle.
The tool This is the eff ect of a function that
pulls in large protects the rechargeable battery by
volumes of turning off the motor when the tool is
grass that exposed to an excessive load. Turn off
are caught the tool and remove the cause of the
between the overload. Press the power button once
cover and the again to continue operation.
nylon head,
the tool is
overloaded.
The Charge the rechargeable battery.
rechargeable
battery power
is low.
The Stop using the rechargeable battery,
rechargeable remove it from the tool and let it cool in
battery is a well-ventilated location not exposed
overheated. to sunlight.
The loop Secure properly.
handle is
not properly
attached to
the main pipe.
The cover Secure properly.
is not been
properly
attached to
the main pipe.
52
Remedy