Hitachi CG 18DSDL Handling Instructions Manual page 32

English
Removing objects from the nylon head when it is still rotating will
lead to injury.
Continuing operation when foreign matter is stuck in the nylon
head may lead to damage.
16. If the tool is operating poorly and produces strange noise or
vibrations, turn off the motor immediately and ask your dealer to
have it inspected and repaired.
Continued use under these conditions could lead to injury or tool
damage.
17. If you drop or bump the tool, inspect it carefully to check there is
no damage, cracks or deformation.
Using a tool that is damaged, cracked or deformed could result in
injury.
18. Secure the tool during vehicle transport to ensure that it lies still.
Failure to heed this warning may result in an accident.
19. This product contains a strong permanent magnet in the motor.
Observe the following precautions regarding adhering of chips
to the tool and the eff ect of the permanent magnet on electronic
devices.
CAUTION
○ Do not place the tool on a workbench or work area where metal
chips are present.
The chips may adhere to the tool, resulting in injury or
malfunction.
○ If chips have adhered to the tool, do not touch it. Remove the
chips with a brush.
Failure to do so may result in injury.
○ If you use a pacemaker or other electronic medical device, do not
operate or approach the tool.
Operation of the electronic device may be aff ected.
○ Do not use the tool in the vicinity of precision devices such as cell
phones, magnetic cards or electronic memory media.
Doing so may lead to misoperation, malfunction or loss of data.
CAUTION
1. Do not turn on the nylon head for cutting objects other than grass.
Do not operate the tool in water puddles and make sure that soil
does not come into contact with the nylon head.
2. The tool contains precision parts and should not be dropped,
exposed to strong impact or water.
The tool could be damaged or malfunction.
3. When the tool is to be stored after use or be transported, remove
the nylon head.
4. Do not expose the tool to insecticide and other chemicals.
32