Canon imageRUNNER 2545i Copying Manual page 80

2
3
4
Press [-] or [+] to set the frame erase widths.
NOTE
• The default settings are '4 mm' for each side and '10 mm' for the center. You can
adjust the frame erase width to between 1 mm and 50 mm.
• When entering values in millimeters, you can also use
(Clear) on the control panel.
• To enter values in inches, see Chapter 3, "Configuring the Machine's Basic Settings,"
in the Reference Guide.
Press [Book Frame Erase] ➞
[Next].
Select the size of the bound
original when it is open ➞ press
[Next].
IMPORTANT
You can set the Book Frame Erase
mode only for the original paper sizes
shown on the touch panel display.
NOTE
To select the paper size in inches,
press [Inch-size].
-
Erasing Shadows/Frame Lines (Frame Erase)
(numeric keys) and
3-17
3