Canon imageRUNNER 2545i Copying Manual page 78

4
Press [-] or [+] to set the frame erase width.
NOTE
• The default setting is '4 mm'. You can adjust the frame erase width to between 1 mm
and 50 mm.
• When entering values in millimeters, you can also use
(Clear) on the control panel.
• To enter values in inches, see Chapter 3, "Configuring the Machine's Basic Settings,"
in the Reference Guide.
● If you want to set the same width for all four borders:
● If you want to set the top, left, right, and bottom widths independently:
-
❑
Press [-] or [+] to set the frame erase
width ➞ press [OK].
❑
Press [Adjust Each Dim.].
Erasing Shadows/Frame Lines (Frame Erase)
(numeric keys) and
3-15
3