Samsung GT-P5100 Service Manual page 18

7-1-2. assemble
Assemble KEY FPCB, MOTOR, SPK L/R
1
and LCD FPCB&rubber
SPK R
Be careful not to damage the FPCBs
3
Assemble the Battery and IF FPCB.
MIC RUBBER and attach INSU TAPE.
Be careful not to damage the FPCBs
This Document can not be used without Samsung's authorization
KEY FPCB
MOTOR
SPK L
SAMSUNG Proprietary-Contents may change without notice
2
Put the PBA to Bracket ass'y then connect SPK
L/R, KEY FPCB.
Assemble EAR JACK, EARJACK SUS, 3M/VGA
CAM and LIGHT SENSOR. and GPS Coaxial
cable
Be careful not to damage the FPCBs
4
Attach 3 INSU TAPEs to connector.
Screw 14 points.
Be careful not to damage the FPCBs
7-3
7. Level 2 Repair