Specifications - Toro 74919TE Operator's Manual

Blade-Control Switch (PTO)
Use the blade-control switch (PTO) to engage the electric
clutch and drive the mower blades. Pull the switch up to
engage the blades and release. To disengage the blades,
push the blade-control switch (PTO) down or move a
motion-control lever into the N
Ignition Switch
This switch is used to start the mower engine and has 3
positions: S , R , and O
TART UN
Motion-Control Levers
Use the motion-control levers to drive the machine forward
and reverse, and to turn either direction.
Neutral-Lock Position
Use the N - position with the safety-interlock
EUTRAL LOCK
system to engage and to determine the N
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
- position.
EUTRAL LOCK
.
FF
position.
EUTRAL

Specifications

Note: Specifications and design are subject to change
without notice.
Width:
132 cm (52 inch)
Deck
Cutting Width 132 cm
(52 inches)
Without Deck 116 cm
(46 inches)
Deflector—Up 146 cm
(58 inches)
Deflector—Down 172 cm
(68 inches)
Length:
132 cm (52 inch)
Deck
Roll Bar—Up 201 cm
(79 inches)
Roll Bar—Down 206 cm
(81 inches)
Height:
Roll Bar—Up
179.1 cm (70.5 inches)
Weight:
Model
74919TE
74925TE
15
152 cm (60 inch)
Deck
152 cm
(60 inches)
134.6 cm
(53.0 inches)
156.8 cm
(61.7 inches)
192.2 cm
(75.7 inches)
152 cm (60 inch)
Deck
211.1 cm
(83.1 inches)
215.4 cm
(84.8 inches)
Roll Bar—Down
118.9 cm (46.8 inches)
Weight
537 kg (1183 lb)
590 kg (1301 lb)