Positioning The Seat; Headlights; Using The Blade Control (Pto) - Toro Wheel Horse 12–32 XL Operator's Manual

Positioning the Seat

The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. Raise the seat and loosen the adjustment knob
(Fig. 3).
2. Move the seat to the desired position and tighten
the knob.
Figure 3
1. Adjustment knob

Headlights

Headlights are optional on some models. A
dash-mounted "ON/OFF" switch (Fig. 1) controls the
headlights. The lights only shine while the engine is
running and the switch is "ON."

Using the Blade Control (PTO)

The blade control (PTO) engages and disengages
power to the blade(s).
Engaging the Blade(s)
1.
2.
1
m–1862
1. Disengaged
2. Engaged
Disengaging the Blade(s)
1.
2.
Depress the clutch/brake pedal to stop the
machine.
Move the blade control (PTO) to "ENGAGED"
(Fig. 4).
2
1
Figure 4
Depress the clutch/brake pedal to stop the
machine.
Move the blade control (PTO) to
"DISENGAGED" (Fig. 4).
Operation
3
m–1852
3. Blade control (PTO)
11