Check And Clean The Hydraulic-Unit Shrouds - Toro 74906 Operator's Manual

1. Engine guard
2. Engine air-intake screen
3. Bolt
Check and Clean the
Hydraulic-Unit Shrouds
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Raise the seat.
4. Clean the debris and grass from the hydraulic unit
shrouds (Figure 78).
5. Lower the seat.
Figure 77
4. Fan housing
5. Screw
1. Hydraulic-unit shrouds
49
Figure 78