Vehicle Installation - Thinkware X330 User Manual

1-5. Vehicle Installation

1-5-1. Connecting the Device and the
Mount
 ① Align the mount with the connector (A), and slide it
towards (B) until it clicks into place.
 ② Remove the protective film from the camera lens.
1-5-2. Installing the Device
① Clean the area on the windshield where the
dash cam will be installed.
② With dash cam main unit still attached to the
mount, remove the protective tape from the
back of the mount.
③ Attach the adhesive side of the mount on the
windshield where it has an unobstructed view
of the road but does not interfere with the
driver's view.
TIP
The camera is located on the left side of the main unit
so install the dash cam on the right of center behind the
rearview mirror.
TIP
To ensure that the mount is safely secured, it is recommend-
ed that you separate the device from the mount after instal-
lation and press the mount towards windshield for 5 minutes
to maintain pressure. Allow 24 hours until the adhesive on
the mount has set before connecting the dash cam.
7