Page 1
X550 U s e r M a n u a l This Dashboard Camera (dash cam) is a specialized onboard device that continuously records video while the vehicle is in use. Some features may not be available depending on installation, driving conditions, and vehicle type. The video quality might vary for each device as a result of installed firmware.
▶ THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements.
Product may result in malfunction and/or the surrounding temperature. damage to the device. THINKWARE is NOT responsible for the loss of any Do not operate this device while driving. recorded video during operation. Install this device in a location where it has unob-...
1. Getting Started This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with the unit to ensure compliance. 1-1. In the Package Mount with 3M tape Adhesive Cable Holder Main Dash Cam Unit Car Charger (1ea) (5ea)
1-3. Product Overview Front view Rear view Right view Top view Name Description Camera Lens Front facing camera for video recording Mount Connector Connects to the windshield mount Operation indicator lights that are used to visually indicate that the Security LED vehicle is equipped with a dash cam Speaker For voice guidance and alert/notification sounds...
The MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable item, it should be replaced periodically. THINKWARE shall NOT be responsible for any problems and/or damages that may occur from not using genuine or authorized parts and accessories. It is strongly recommended that THINKWARE memory cards are used to minimize memory card error.
1-5. Vehicle Installation 1-5-1. Connecting the Device and the Mount ① Align the mount with the connector (A), and slide it towards (B) until it clicks into place. ② Remove the protective film from the camera lens. 1-5-2. Installing the Device ①...
Recommended locations for the adhesive wire clips to arrange the power cable. For more information on the power cable routing instruction, please visit Thinkware homepage. (www.thinkware.com) Preventing Vehicle Battery Discharge ■ Depending on the make and model of your car, the power may be supplied to the dash cam even with the ignition turned off.
2. Basic Operations 2-1. Turning the Device Power On/Off Once connected to the vehicle, the device will automatically turn on and off with vehicle ignition. Power cable for vehicle To manually turn the device on/off, press and hold the Power button ( ) for 3 seconds.
2-2. Road Safety Warning 2-2-1. Safety Camera Alert Safety Camera Alert : Using GPS and database, safety camera alert will warn the driver when approaching traffic enforcement zones such as red light camera, speed camera, average speed camera, and mobile speed zones. ①...
Page 13
2-2-2. Advanced Driver Assistance Systems (ADAS) ADAS Auto Calibration 1. ADAS settings must be calibrated before use. 2. Auto Calibration will initiate when driving on a straight road at a speed greater than 18mph Align blue line with center of the hood (30km/h) for more than 1 minute.
Page 14
Front Vehicle Departure Warning (FVDW) Front vehicle departure warning alerts the driver when the vehicle ahead starts to move forward from a complete stop. ┗ The vehicle must be at a complete stop for more than 4 seconds in order for the FVDW notification to be activated. ①...
2-3. Recorded Files Recorded video files are saved in the folder by date and hour in the MicroSD card. ┗ Files are created based on the time when the videos are recorded. Front view Year Month Day Hour Second recording Minute Rear view recording...
2-4. Recording Videos While Driving 2-4-1. Continuous Recording Mode Videos are recorded in 1 minute segments and saved as files in the MicroSD card under the folder named “cont_rec”. 2-4-2. Incident Recording During Continuous Recording Mode When the dash cam detects impact, it will immediately store the 10 seconds prior and 10 seconds after impact.
Page 17
2-4-3. Dual Save (Internal Memory Backup) Dual Save is a Thinkware proprietary technology that utilizes built-in memory as secure backup in addition to the MicroSD memory card. Dual Save technology guarantees incident video recording using internal memory in case of an accident that causes damage to the MicroSD memory card.
2-5. Recording Videos While Parked (Optional Accessory) This feature is available only when the dash cam has been hardwired directly to the vehicle battery. Separate purchase for the hardwiring cable accessory and professional installation is required. 2-5-1. Incident Recording When the dash cam detects impact while parked, it will imme- diately store the 10 seconds prior and after the impact.
2-6. Manual Recording In addition to recording accidents, the dash cam allows the user to initiate manual recording mode to cap- ture scenery and/or places while driving. This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident.
Make sure your device is always up to date with latest firmware. Please check back frequently at THINKWARE website (www.thinkware.com) for the latest firmware updates. Do NOT disconnect your device from power while it is being updated. This will result in damage to the dash...
3-2. Live View LCD screen can be used to verify current recording view. Switch to Front/ Rearview camera (appears only when Rear view Back to main menu rearview camera is connected) Audio recording status Manual recording Current speed / Voltage status...
3-3. File List Recording will suspend when browsing through video list and settings menu. Visual notification will appear on the screen to confirm the suspension of recording prior to entering the menu. 3-3-1. File List - 1 Continuous : Lists loop recording videos during continuous mode (in 1 minute segments) ...
Page 24
3-3-2. File List - 2 Recording will stop when accessing on-screen menu. Video file name Current Video playback play time progress bar Total playing time Switch to front/rear view Enter zoom view Mute on/off Play/Pause Next Previous Video playback with 3X zoom Directional button Exit zoom view...
3-4. Memory Card Settings Memory Partition : Sets how storage space on the memory card will be allotted for each recording mode ┗ Type A (recommended) : Optimized for continuous recording ┗ Type B : Optimized for incident and motion detection during parking surveillance ┗...
3-5. Dual Save Videos Videos : View Dual Save video list Copy to SD : Copy all videos saved on the internal memory to MicroSD card Delete All : Delete all videos saved on the internal memory...
3-6. Settings > Camera Settings Brightness-F/R : Sets the video recording brightness for front/rear camera Wide Dynamic Range : Sets the WDR mode to record clear video even in extreme contrast / back-lit environment.
3-7. Settings > Record settings Impact Sensitivity : Sets the impact sensitivity level. Use Park. Mode : Sets Parking Surveillance Recording to Off / Motion / Time Lapse settings. Super Night Vision : Enhance video exposure for low-light conditions during Parking Surveillance Mode. ...
3-8. Settings > Road Safety settings Road Safety Warning System ┗ Road safety settings : Sets audible notifications for road safety warnings. Advanced Driver Assistance Systems (ADAS) ┗ Vehicle Type : Sets to optimize ADAS features according to user's vehicle type ┗...
3-9. Settings > System Settings Language : Sets dash cam system language Voice Volume : Sets the volume level LCD Brightness : Sets the brightness of the LCD screen LCD Auto-Off : Sets the time for LCD auto shut off ┗...
3-10. About Device Functions : Help for device features Device Info : Information on device and firmware ┗ Factory Reset : Restores to factory setting GPS Info : View GPS information ┗ GPS Initialization : Reset GPS...
The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card within the package. Please check THINKWARE homepage(www.thinkware.com) for the latest Dash Cam PC Viewer application.
Page 33
Windows 8.x (32/64 bit) ① Move the file named “Dashcam Viewer.zip” stored in the MicroSD card to the desktop. ② Right click on the mouse and select “Open With” > “Archive Utility” to launch the Thinkware Dash Cam viewer application.
Page 34
The MicroSD card will not be recognized by the PC Viewer until it has been used in the dash cam. It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer.
Page 35
4-1-4. Thinkware Dash Cam Viewer Overview Full screen Switch between front/rear view Dash cam setting / Information File open Rear view (Enabled only if Mi- croSD card contains video captured using rear view Viewing screen camera) Playback Checks the location...
Page 36
4-1-5. View Video Playlist Select appropriate folder (Continuous Recording, Incident Recording, Parking Image, Parking Incident, Manual Recording) to see the playlist for each recording mode. Continuous Recording Playlist Manual Recording Playlist...
5-1. Specifications The specifications of this product may change without prior notice for product improvements. Item Standard Note Model X550 104.3 x51.4 x 29.3mm / 109g Size/weight 4.1 x 2.02 x 1.15 inches / 0.24lbs Display Panel 2.7"LCD (320x240) Capacity...
Need help?
Do you have a question about the X550 and is the answer not in the manual?
Questions and answers