Samsung 6 SERIES Installation Manual page 31

Hotel TV Function
Category Item
Welcome Message
Edit Welcome
Message
Hospitality Logo
Logo/
Message
Hospitality Logo DL
Logo Display Time
Clone TV to USB
Clone USB to TV
Cloning
Setting Auto
Intialize
REACH
REACH IP Mode
Server IP Setting
REACH Channel
REACH Update Time
REACH
Solution
REACH Update
Immediate
Group ID
Room Number
REACH Config
Version
Initial value
OFF displays on Welcome Message.
Edit the Welcome Message.
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the
OFF Logo is displayed, before the signal from the initial source, for the amount of time
set in "Logo Display Time"
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
..
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
.. Set the logo display time (3/5/7 Seconds).
Clone the current TV option values to a USB memory device.
Clone the saved TV option values in a USB memory device to the TV.
When Setting Auto Initialize is set to On, and the power is turned off and on or
the Master Power is turned off and on, the data is restored to the cloned values. If
OFF there is no cloned value, even when the Setting Auto Initialize is set to On, it will
be ignored and the operation will be the same as that whenSetting Auto Initialize
is set to Off
• ON: The feature of REACH in this TV becomes available.
OFF
• OFF: The feature of REACH in this TV becomes not available.
... If enabled, Reach will work over IP instead of RF.
... The URL of the Reach IP server, for example https:\\192.168.1.2:443.
Assign a DTV channel number to carry the update REACH data. This channel
...
number must be the same as the number set on the Reach server.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH
contents is downloaded from the REACH server to the TV :
1hour: Every hour
2hour: Every 2 hours
...
12:00 AM: every 12:00 a.m.
2:00 AM: every 2:00 a.m.
12:00 PM: every 12:00 p.m.
2:00 PM: every 2:00 p.m.
• ON: Whenever the TV enters standby mode (the power cord is plugged in and
the power is off), the REACH data is updated on the TV.
...
• OFF: The REACH data is only updated on the TV at the REACH server update
time.
Select the Group ID of the REACH server. (Refer to the REACH server manual for
...
more details.)
... et the Room Number.
... The version of REACH is displayed.
Description
31
English