Samsung 6 SERIES Installation Manual page 11

✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎ When connecting an external device, match the colour of the connection terminal to the cable.
AV IN
1
‒ Connect audio cables to "[L-AUDIO-R]" on your TV and the other ends to corresponding audio out jacks on an A/V
device.
‒ Connect RCA audio cables (optional) to "[L-AUDIO-R]" on the rear of the TV set and the other ends to
corresponding audio out jacks on the external device.
‒ When connecting to
cable (Yellow).
USB (5V 0.5A), USB (HDD/1.0A) / CLONING
2
‒ Connector for software upgrades and Media Play, etc.
‒ Service connection.
HDMI IN / HDMI IN (ARC) / HDMI IN (DVI)
3
Connects to the HDMI jack of a device with an HDMI output.
✎ No sound connection is needed for an HDMI-HDMI connection. HDMI connections carry both audio and video.
✎ Use the HDMI IN (DVI)
adapter (DVI to HDMI) for the video connection and the
LAN
4
Connect to a wired LAN using CAT 7 cable.
ANT IN (SATELLITE),
5
‒ To view television channels correctly, the TV must receive a signal from one of the following sources:
‒ An outdoor antenna / A cable television system
6 HEADPHONE JACK
Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers is disabled.
RJP
7
This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
modules to improve device use and convenience.
PC/DVI AUDIO IN
8
Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable. Some DVI devices
may not or should not need this connection audio.
PC IN
9
Connect to the video output jack on your computer.
VOL-CTRL
0
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
VARIABLE AUDIO OUT
!
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the Variable port (RCA).
CLOCK
@
Set the time after connecting the cable of the External Clock to Clock jack. You can use the External Clock Display
function.
DATA
#
‒ Used to support data communication between the TV and the SBB.
‒ Connects using RJ-12 TV type plugs.
DIGITAL AUDIO OUT (OPTICAL)
$
Connects to a Digital Audio component.
AV IN, the colour of the
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
(AIR/CABLE)
AV IN [Y/VIDEO] jack (Green) does not match the colour of the video
PC/DVI AUDIO IN jacks for audio.
11
English