Table of Contents
Advertisement
Drive belt
1
Mulch plug
2
Rear insert
3
Transmission drive pulley
4
Idler bracket
5
Drive cover
6
Blade adapter
7
Idler pulleys
8
Front belt keeper
9
Stripper ring
10 Blade
11 Hardened washer
12 Lock washer
13 Blade bolt
14 Belt cover
MAINTENANCE
2
6
7
1
9
10
12
Remove the drive belt
•
•
•
•
3
4
8
14
11
13
Empty the fuel tank by running the machine until the
tank is empty.
Always disconnect the spark plug before performing
maintenance or accessing mocable parts.
Turn lawn mower on its side. Make sure air filter and
carburetor is facing upward.
Remove drive cover.
5
3
English – 25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the LC221A and is the answer not in the manual?
Questions and answers
I mowed my front yard, stopped the engine, took it around back and now it won’t start
The Husqvarna LC221A mower may not start after mowing your front yard due to several possible reasons:
1. Incorrect starting procedure – Ensure you follow the correct steps to start the mower.
2. Clogged air filter – Clean or replace the air filter.
3. Empty fuel tank – Refill with fuel.
4. Defective or disconnected spark plug – Replace the spark plug and make sure the wire is connected.
5. Loose blade or broken blade adapter – Check and tighten or replace if needed.
6. Defective engine brake handle – May require service by an authorized technician.
7. Fuel valve (if equipped) is OFF – Turn it to the ON position.
8. Low battery voltage or incorrect battery connection (if equipped) – Charge or reconnect the battery properly.
Check each of these factors to identify and fix the issue.
This answer is automatically generated