Cub Cadet S621 SS Operator's Manual page 8

Cable Tie
Lower
Handle
Figure 4
• The rope guide, connected to the support rod, is
located on the right side of the lower handle. See
Figure 5.
Starter
Rope
Rope
Guide
Figure 5
• With the spark plug wire disconnected and
grounded, and with the safety key in the locked
position, pull the starter rope out of the engine. Slip
the starter rope into the rope guide. Tighten the
wing nut to secure.
Attaching Grass Bag
Grass Bag
Adapter
Wing
Nuts
Figure 6
Lower
Handle
Support
Rod
• Remove wing nuts holding the mulching baffle or
side discharge chute in place and remove from unit.
• Replace with grass bag adapter, while making sure
the inner lip of attachment goes under the edge of
the deck. Secure with the wing nuts previously
removed. See Figure 6.
• Lift chute door on the grass bag adapter and slide
grass bag onto the adapter. See Figure 7.
NOTE: The chute door has been designed to move the
starter rope out of the way of the bag when the chute
door is opened.
Chute
Door
Grass
Bag
Attaching Side-Discharge Chute
• Remove mulching baffle or grass bag adapter from
the unit by disconnecting the wing nuts.
• Attach side discharge chute to the unit and secure
with wing nuts. See Figure 8.
Side Discharge
Chute
8
Figure 7
Figure 8