Maintenance; Drain And Replace The Oil - Clarke SHHH AIR 100/24 Operation & Maintenance Instructions Manual

Shhhair 100-24, 100-50, 150,100.book Page 10 Wednesday, July 30, 2008 5:23 PM

MAINTENANCE

Check the oil level, See "Adding Oil" on page 5.
Drain the water collected in the air outlet filter. See
"Draining the Tank" on page 8.
Remove the condensate that has collected in the air
tank. See "Draining the Tank" on page 8.
Once a month check the compressor for loose
connections, wear, etc.
Clean the compressor with a soft cloth.
Check the safety valve pulling the ring gently when
there is pressure in the tank.
Total replacement of oil See "Drain and replace the oil"
on page 10.

DRAIN AND REPLACE THE OIL

Drain and replace the oil annually, as follows:
1. Remove the 4 hex head screws securing each of the compressor heads.
2. Pull off the heads, complete with sealing rings.
3. Invert the the compressor carefully, so that the oil is drained into a suitable
container.
• Dispose of the oil according to local regulations.
4. Reassemble the heads ensuring the sealing rings are in perfect condition
and is located correctly.
Before
each
use
X
10
Once
Once
a
a Year
Month
X
X
X
X
X
X