How To Reset The Switch; Figure 23: Reset Button; Table 11: Using The Reset Button - Edge-Core ECS410-52T Installation Manual

How to Reset the Switch

Note that the guest default user login will only allow a user to view switch
parameter data.
For a detailed description of connecting to the console and using the switch's CLI,
refer to the Management Guide.
The Reset button located on the rear panel of the switch can be used to restart the
device and set the configuration back to either the current saved configuration file
or the factory default settings.
Press the Reset button for 3 to less than 6 seconds to restart the system software
using the current saved configuration file. Press the Reset button for 6 seconds or
more to restart the system software using the factory default settings. Refer to the
table below for further details.

Table 11: Using the Reset Button

Duration Pressed
Less than 3 seconds
From 3 to less than 6
seconds
6 seconds or more

Figure 23: Reset Button

1
1
Reset Button
Result
No result
Switch reboots using saved
configuration file
Switch reboots using the
factory default settings
– 43 –
Chapter 6
| Switch Management
How to Reset the Switch
Settings Integrity
No change to any settings.
Unsaved settings in the current
running configuration lost
Saved configuration file
integrity maintained