Table of Contents
Advertisement
4. Insert post on cable ties into holes provided on the
lower handle. Pull cable tie tight and trim excess.
See Figure 4-4.
5. Each wheel has a height adjustment lever to change
the cutting height of the mower. To change the height
of cut, squeeze adjuster lever toward the wheel,
moving up or down to selected height. See Figure
4-5.
6. Your mower has been shipped as a mulcher. To
discharge grass to the side, lift mulching plug. Slide
the two hooks on the side discharge deflector under
the hinge pin on the mulching plug assembly, see
Figure 4-6. Lower the mulching plug.
Figure 4-4
2
1
3
Figure 4-5
B
Figure 4-6
9
Setup and
Adjustments
NOTE: All wheels must
be in the same height
of cut.
When cutting in heavy
or moist grass, the rear
of the lawnmower may
be raised higher to
allow better discharge
of the grass.
A
4
Advertisement
Table of Contents
