Error Codes - Disc Makers Reflex 1 User Manual

Error
Error Message
Code
Targets &
206 Master Size
Mismatch!
Targets M Code
207
Mixed!
Targets are not
208
RW discs!
Master Disc is
209
CSS Protected!
210 Bad Discs!
This format can
211
not be tested!
Description & Recommended Solutions
Description:
When the error code occurs during the Compare process, the size of
the master disc and the successfully copied disc(s) do not match.
When the error code occurs during a Copy related process, the
capacity of the blank disc(s) is less than the data size of the master
disc.
Possible Solution:
When the error code occurs during the Compare process, contact
Tech Support.
When the error code occurs during a Copy related process, please
go to "Disc Info" in "Utilities" to make sure the blank disc's capacity is
large enough to fit the data size of the master disc.
Description:
The blank discs contain different manufacturer codes.
Possible Solution:
Go to "Disc Info" in "Utilities" to make sure every blank disc has the
same media ID (M-Code). Replace the one(s) that are different if
necessary.
Description:
The target(blank) discs are not Rewritable discs
Possible Solution:
Go to "Disc Info" in "Utilities" to make sure every blank disc is a
rewriteable disc.
Description:
The master disc is copy-protected.
Possible Solution:
This master disc contains copy-protection.Try a different master disc.
Description:
The target (blank) disc(s) are detected but can not be identified.
Possible Solution:
Double check the blank disc(s) quality.
Description:
The target (blank) disc(s) is DVD+R, DVD+RW, DVD+R DL, BD-R or
BD-RE.
Possible Solution:
Above disc formats are not supported by the Test function.
- 28 -