Hitachi CP-WU5500 User Manual page 39

Correcting the distortion (continued)
 PERFECT FIT:
When PERFECT FIT is pointed at, pressing the
► or ENTER button displays the PERFECT FIT
dialog.
This projector is equipped with a test pattern for
PERFECT FIT. Select PATTERN with the ▲/▼
buttons, then press the ◄/► buttons to switch on
and off.
1.
Select SETUP with the ▲/▼ buttons and
press the ► or ENTER button.
2.
Select one of the corners or sides to be adjusted
with the ▲/▼/◄/► buttons and press the
ENTER or
3.
Adjust the selected part as below.
● For adjusting a corner, use the ▲/▼/◄/► buttons to adjust the position of
the corner.
● For adjusting the upper or lower side, use the ▲/▼ buttons to adjust the
distortion of the side.
● For adjusting the left or right side, use the ◄/► buttons to adjust the
distortion of the side.
● To adjust another corner or side, press the ENTER or
the procedure from step 2.
(continued on next page)
button.
Operating
button and follow
39