Advertisement
ON
Central heating and Hot water is ON continuously
AUTO
Central heating and Hot water will be switched ON or OFF as
programmed
ALL DAY
Central heating and Hot water will be switched ON only once each
day between the first ON time and last OFF time.
OFF
Central heating and Hot water continuously OFF
SETTING THE TIME
- Press the SET button (1) once. The configuration setting will appear on
the screen.
- Press the SET button (1) again. The clock icon (2) on the screen will flash.
- Press the +/- buttons (3) to adjust the time. Time will change quicker if pressed
continually.
- Press SET (1) once to move on to setting the DATE or press multiple times to return
to RUN mode.
(2) (4)
SETTING THE DATE
- Press the SET button (1) until the Y:XX icon (year) appears and the D (DATE)
icon (4) flashes.
- Press the +/- button (3) to set the year.
- Press NEXT button (5). M:XX appears (month).
- Press +/- button (3) to set month.
- Press NEXT button (5). D:XX appears (Day).
- Press +/- button (3) to set day.
(1)
(3)
(5)
4
You can review or edit the date you have set just by pressing NEXT button (5) again
and repeating the sequence above. To confirm the date and move on to PROGRAM
mode press SET button (1) once or press SET button (1) multiple times to return to
RUN mode.
CHANGING PROGRAMME TIMES
The built in programmes can easily be changed to better suit your lifestyle.
To change the times:
Press SET button (1) until PROGRAM (2) flashes in the display and 1 ON (5) appears.
This indicates the time shown on the display is the first ON time.
By pressing the +/- buttons (3) you can alter the ON time to the time you want.
(2) (5)
Press NEXT button (4), display will now show 1 OFF (5).
By pressing the +/- buttons (3) you can alter the OFF time to the time you want.
Press NEXT button (4) to access remaining ON/OFF periods and alter in same manner
as above.
To return to RUN mode, press the SET button until the display indicates RUN on the
display
NOTE: Programming is in 10 minute segments.
(1)
(3)
(4)
5
Advertisement
