Advertisement
7 day programmer option
If the unit is installed as a 7 day programmer, the initial programme displayed will be for
Monday.
You can go to any date of the week by pressing the DAY button repeatedly.
The ON/OFF times can be changed for each day as described above in the section "CHANGING
PROGRAMME TIMES".
If you press the COPY button, the current programme will be copied onto the next day.
NOTE: it is not possible to copy Sunday to Monday.
5 day /2 day programmer option
If the unit is installed as a 5 day/2 day programmer, the initial programme displayed will be for
Monday to Friday.
Pressing the DAY button will take you to the programme for Saturday and Sunday.
The ON/OFF times can be changed for each day group as described above in the
section "CHANGING PROGRAMME TIMES".
If you press COPY button, the current programme will be copied onto the next day group.
24 hour programmer option
If the unit is installed as a 24 hour programmer, the built in programme will be the same for
each day. The COPY & DAY buttons have no affect if installed as a 24 hour
programmer.
PROGRAMMING NOTES
The unit will automatically return to RUN mode if a period of 5 minutes passes without any but-
tons being pressed.
For convenience, to allow for programmes to go past midnight, the programme day is from
03:00am to 02:50am the next day.
If a programme is required to run from 1.00 am to 8.00 am then 2 programmes must be used
because it is not possible to programme through 2.50 am. (The programme should be split up
into two sections ; 3.00 am > 8.00 am and 1.00 am > 2.50 am).
RESET
Press the reset button with a non-metallic pointed tool to restore the built in
programme. As well as restoring the built in programme, it also resets the time to 12:00pm and
the date to 01/01/2000. Initially the display shows all segments lit for a few seconds, but then
will show the current configuration. See SETTING THE TIME section to continue.
As a safety feature after reset the unit will be in OFF operating mode. Reselect your required
operating mode,
NOTE: Use of excessive force may result in the reset button sticking behind the front
cover of the programmer. If this happens the unit will "freeze" - and the button can
only be released by a qualified installer
BUILT IN PROGRAMME
For convenience, the programmer has a built in programme which will be satisfactory
for many people, but which can be changed very easily (see section CHANGING
PROGRAMME TIMES). Once the unit is powered up this built in programme will run.
If the user changes from the built in programme and wishes to return to it, then
pressing the reset button with a non metallic pointed tool will return the unit to the
built in / default programme. NOTE: Every time the reset is pressed, the time and
date must be set again. See the sections
Factory Programme Settings
Configuration 2Pu
Configuration 3Pu
1st ON
1st ON
1st OFF
1st OFF
-
2nd ON
-
2nd OFF
2nd ON
3rd ON
2nd OFF
3rd OFF
If the unit is installed as a 24 hour programmer the built in programme will be the
same for each day (ie Sat-Sun be same as Mon-Fri above).
SELECTING OPERATING MODE
MODE
6
SETTING THE TIME & SETTING THE DATE
Mon-Fri
Sat-Sun
06:00am
07:00am
08:30am
09:00am
12.00noon
12.00noon
12.00noon
12.00noon
04:30pm
04:30pm
10.30pm
11.00pm
3
Advertisement
