Change User Password - Asus P5SD1-FM2 User Manual

After you have set a supervisor password, the other items appear to allow
you to change other security settings.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
User Access Level

Change User Password

Clear User Password
Password Check
Boot Sector Virus Protection
User Access Level (Full Access]
This item allows you to select the access restriction to the Setup items.
Configuration options: [No Access] [View Only] [Limited] [Full Access]
Change User Password
Select this item to set or change the user password. The User Password
item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a User Password:
1 .
2 .
3 .
2-30
This Manual: http://www.manuallib.com/file/2595652
If you forget your BIOS password, you can clear it by erasing the CMOS
Real Time Clock (RTC) RAM. See section "1.6 Jumpers" for information
on how to erase the RTC RAM.
: Not Installed
: Not Installed
No Access prevents user access to the Setup utility.
View Only allows access but does not allow change to any field.
Limited allows changes only to selected fields, such as Date and
Time.
Full Access allows viewing and changing all the fields in the Setup
utility.
Select the Change User Password item and press <Enter>.
On the password box that appears, type a password composed of at
least six letters and/or numbers, then press <Enter>.
Confirm the password when prompted.
[Full Access]
[Setup]
[Disabled]
Chapter 2: BIOS setup
<Enter> to change
password.
<Enter> again to
disabled password.