Install A Memory Card; Charge The Battery; Install The Battery; Replace The Back Cover - Samsung Galaxy NOTE EDGE User Manual

Install a Memory Card

You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see Install a Memory

Install the Battery

1. Insert the battery into the opening on the back of
the phone, making sure the connectors align.
2. Gently press down to secure the battery.

Replace the Back Cover

1. Place the battery cover onto the back of the
phone and press down.
2. Press along the edge of the back cover until you
have a secure seal.
Getting Started
Card.

Charge the Battery

Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery from any standard outlet.
The battery comes partially charged. You can use
the device while charging.
Note: For fastest charging times, use the Adaptive
Fast Charging charger that comes with your phone.
This charger provides faster charging only when
connected to devices that support Adaptive Fast
Charging.
1. Insert the USB cable into the port.
2. Connect the USB cable to the charging head,
and then plug the charging head into a standard
outlet.
3. When charging is complete, unplug the charging
head from the outlet and remove the USB cable
from the device.
Caution: Failure to unplug the wall charger before you
remove the battery, can cause damage to the device.
5 Assemble Your Device