Samsung 305PN50550 User Manual page 45

® The Anynet+ function only works when the active source on the TV remote control is set to TV.
®
The
~
button works only while in the recordable state.
® You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
® The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.
®
The Anynet+ functions do not operate with other manufacturers' products.
The
c:J, c:J
operations may differ depending on the device.
- - - - - - - - - -
Operation
• Anym~t+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
_ _
Any~~!,:Men~
Description
___
~~ew_~ ~witches
from
~nynet+
to TV broadcast mode._. _
Device List
I
Displays the Anynet+ device list.
- - - - - - - - I - - - - - - - - . - - - - . ---------
Recording
!
Starts a recording. (This menu works only for a device supporting recording.)
------------t----- .---
i
Shows the menu of the connected device.
Menu
I
! Example: When a DVD Recorder is connected, the DVD Recorder's title menu appears.
-------------_._--~--_._-------_._.-.-._-,-------------------------,---,-~----_._ ...
_--"----------
i
Shows the play control menu of the connected device.
I
I
Example: When a DVD Recorder is connected, the play control menu of the DVD Recorder appears.
- - - - - - - - - - - - : - - - - - - - - - - - - - - - - - _ . _ - - - - -
Timer Recording
i
Allows reserving a recording. (This menu works only for a device supporting recording reservations.)
Stop Recording
Receiver
Stops recording.
- - , - -
Sound is output through the receiver (home theater).
Setup You can set the Anynet+ (HDMI-CEC), auto turn off, and searching connections for using Anynet+.
o
Recording
You can make a recording of a TV program using a Samsung recorder.
1. Press the TOOLS button.
2. Press the'" or T button to select Recording Immediately and press the ENTER[3I
button. Recording begins.
When there is more than one recording device
When multiple recording devices are connected, the recording devices are listed.
Press the ... or T button to select a recording device and press the ENTER[3I
button. Recording begins.
VIIhen the recording device is not displayed
Select Device List and press the red button to search devices
3. Pmss the EXIT button to exit.
®
Pmssing the
~)
button will record whatever you are currently watching. If you are watching video from another device, the video
from the device is recorded.
®
Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an antenna
to a recording device, refer to the recording device's users manual.
o
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1. Pmss the TOOLS button. Press the'" or T button to select Receiver.
2. Pmss the'" or .. button to select to On.
Now you can listen to sound through the receiver.
3. Pmss the EXIT button to exit.
® If your receiver supports audio only, it may not appear in the device list.
®
The receiver will work when you have properly connected the Optical IN jack of the receiver to the Optical Out jack of the TV.
® When the receiver (home theater) is set to On, you can hear sound output from the TV's Optical jack. When the TV is
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital
component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater
receiver.
®
When using the Media Play feature, sound may not output properly through the receiver.
® When listening through the receiver, there are restrictions for using the audio-related (MTS, Preferred language) menus.
®
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure),
the Speaker Select may be set to External Speaker when you turn the TV on again.