Table of Contents
Advertisement
Setup
[
A~Ynet+ (HDfvI~EC)
On
~
I
Auto Turn Off
Yes
I
- - - - - -
--
- -
f\lo ve
Enter
Return
,f-) Press the TOOLS button to display Tools menu.
You can also set the Anynet+ by selecting Tools
-+
Anynet+ (HDMI-CEC)
•
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
1. Press the. or T button to select Auto Turn Off, then press the
ENTER~
button.
2. Press the. or T button to select Yes, then press the
ENTER~
button.
lEI The Auto Turn Off function is enabled.
lEI If you select No, the Auto Turn Off function is canceled.
3. Press the EXIT button to exit.
lEI The active source on the TV remote must be set to TV to use the Anynet+ function.
lEI If you set Auto Turn Off to Yes, connected external devices are also turned off when
the TV is turned off. If an external device is still recording, it mayor may not turn off.
•
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On
1. Press the MENU button. Press the. or T button to select Application, then press the
ENTER~
button.
2. Press the. or T button to select Anynet+ (HDMI-CEC), then press the
ENTER~
button.
3. Press the • or T to select Setup, then press the
ENTER~
button.
4.
Press the
ENTER~
button to select Anynet+ (HDMI-CEC).
5. Press the. or T button to select On, then press the
ENTER~
button.
lEI The Anynet+ (HDMI-CEC) function is enabled.
lEI If you select Off, Anynet+ (HDMI-CEC) is disabled.
lEI When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivated.
o
Scanning and Switching between Anynet+ Devices
1. Press the TOOLS button.
Press the. or T button to select Device List, then press the
ENTER~
button.
lEI Anynet+ devices connected to the TV are listed.
rEI
If you cannot find a device you want, press the red button to scan for devices.
2. Press the. or T button to select to a particular device and press the
ENTER~
button.
It
is switched to the selected device.
lEI Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
lEI Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.
lEI The time required to scan for devices is determined by the number of connected devices.
lEI When the device scan is complete, the number of devices found are not displayed.
lEI Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is
already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.
lEI If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the TOOLS button.
o
Setting Up Anynet+
The following settings help set the Anynet+ functions.
t- - - - - - - - - - - -
-
_ •.. _ -
, - ~ - - - - - - - - ~ - - - - - . -
..
- ~ - - - - - .
----
---
Available Buttons
Numeric buttons
./T 1...1-.
ENTER~
buttons
Color buttons
1
EXIT button
B
(Backward search)
1
c:.:J
(Forward search)
~ (Stop)
1
0
(Play)
I
C"J
(Pause)
. _ - - ' - - - -
After switching to the device, while
playing a file
After switching to the device, when the
I
menu of the corresponding device is
, displayed on the screen.
Anynet+ Device
•
TV Remote Control Buttons Available in Anynet+ Mode
_____
~!:'ice Ty~~
J
Operating Status
!
Device with built-in Tuner
After switching to the device, when you
are watching a TV program
Gl
CH
I
[~CH
button
Audio Device
When Receiver is activated
VOL
GJ
1
VOL
L-:-_JI
4MUTE button
Advertisement
Table of Contents
Troubleshooting
