Table of Contents
Advertisement
Firmware Upgrade
The IB-NAS4220-B is constructed to allow a complete upgrade of the firmware. The
firmware upgrade form can be found selecting:
Control Panel
Maintenance
Firmware upgrade
The upgrade starts by selecting the upgrade file, which has to be located on the local
hard disk. By clicking on the "Browse..." button a dialog pops up where you are able to
select the file. When having selected please click on the "Start Upgrade" button and the
upgrade process starts by uploading the upgrade file, followed by process of initialization.
Attention:
The firmware upgrade process might take up to 30 minutes time. This
process must not be interrupted. Please make sure that the power
supply is not turned off until the upgrade process is complete.
Attention:
Please save all data and configuration externally before performing an
upgrade! Pay attention to all remarks along the upgrade file!
When the firmware upgrade process is finished the IB-NAS4220-B restarts and the web
browser windows automatically switches to the start form.
Manual IB-NAS4220-B
68
Click on the "Browse..."
button to open a file
selecting dialogue to
select the firmware
upgrade file
Click on the
"Start Upgrade" button
to upload the file and
start the upgrading
process, which might
take up to 30 minutes
and must not be
interrupted
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the IB-NAS4220 and is the answer not in the manual?
Questions and answers