Fps-21 - Nokia MOBILE TERMINAL Service Manual

RM-356
Service Tools and Service Concepts
Issue 1

FPS-21

FPS-21 sales package:
• FPS-21 prommer
• AC-35 power supply
• CA-31D USB cable
FPS-21 interfaces:
Front
• Service cable connector
Provides Flashbus, USB and VBAT connections to a mobile device.
• SmartCard socket
A SmartCard is needed to allow DCT-4 generation mobile device
programming.
Rear
• DC power input
For connecting the external power supply (AC-35).
• Two USB A type ports (USB1/USB3)
Can be used, for example, for connecting external storage memory
devices or mobile devices
• One USB B type device connector (USB2)
For connecting a PC.
• Phone connector
Service cable connection for connecting Flashbus/FLA.
• Ethernet RJ45 type socket (LAN)
For connecting the FPS-21 to LAN.
Inside
• Four SD card memory slots
For internal storage memory.
Note: In order to access the SD memory card slots inside
FPS-21, the prommer needs to be opened by removing the
front panel, rear panel and heatsink from the prommer body.
Note: FPS-10 can be used for flashing instead of FPS-21 if
necessary.
JXS-1
Because the WCDMA network disturbs the RX side testing of the WCDMA
phone and the Tx signal of the WCDMA phone can severely disturb the
WCDMA network, a shield box is needed in all testing, tuning and fault
finding which requires WCDMA RF signal.
The shield box is not an active device, it contains only passive filtering
components for RF attenuation.
COMPANY CONFIDENTIAL
Copyright © 2008 Nokia. All rights reserved.
Flash prommer
RF shield box
Page 2 –13