APRILIA pegaso 650 i.e. Service Manual page 118

FUEL SUPPLY SYSTEM
 2%-/6).' 4(% &5%, ,%6%, 3%.3/2
N
Remove the whole fuel supply pump unit, see 4.3 (RE-
MOVING THE WHOLE FUEL SUPPLY PUMP UNIT).
NOTE
Before removing the screw (1), observe the po-
sition of the components, in order to be able to reassem-
ble them correctly.
N
Unscrew and remove the screw (1).
N
Disconnect the electric connector (2).
N
Remove the fuel level sensor (3).
NOTE
Upon reassembly, position the fuel level sensor
(3) and the electric terminal (4) correctly in their seats.
 2%-/6).' 4(% $%,)6%29 &),4%2
N
Remove the whole fuel supply pump unit, see 4.3 (RE-
MOVING THE WHOLE FUEL SUPPLY PUMP UNIT).
NOTE Have the appropriate special tool m to hand:
– aprilia part# 0277295 (hose clamp installation pliers).
a
CAUTION
Upon installation, replace the hose clamp that has
been removed with a new one having the same di-
mensions, see 0.4.2 (SPARE PARTS CATALOGUES).
Do not attempt to reinstall the removed hose clamp,
since it is unusable.
Do not replace the removed hose clamp with a screw
clamp or with other types of clamp.
N
Release the hose clamp (5).
N
Slip the pipe (6) off the filter (7).
N
Release the hose clamp (8).
N
Slip the filter (7) off the pipe (9).
a
CAUTION
Do not use filters that have already been used.
N
Replace the filter (7) with a new one of the same type.
NOTE
The arrow (10) stamped on the filter (7) indi-
cates the direction of flow of the fuel.
Upon reassembly, take care to position the filter correctly:
the arrow (10) must be directed towards the pipe (6), (see
figure).
4 - 6
- 00
Pegaso 650 I.E.
Release 00/2002-02