Remote Management - TP-Link Archer VR900 User Manual

Chapter 13
6 Click Save.
Now, you can manage the modem router over both HTTP (http://tplinkmodem.net)
and HTTPS (https://tplinkmodem.net).
13 6

Remote Management

By default, remote devices are not allowed to manage the modem router from the
Internet. You can enable remote management over HTTP and/or HTTPS if needed.
HTTPS is a more secure way to access the router.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management
feature because private addresses are not routed on the Internet.
1
Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2 Go to Advanced
Management section.
To enable remote management over HTTP:
1 Enable Remote Management, and keep the
2 Leave the IP/MAC Address
manage the modem router, you can enter the IP address or MAC address of the
device in this field.
3 Click Save.
Now, you can manage the modem router over the Internet via the website address
http://modem router's WAN IP
Note:
1. You can find the WAN IP address of the modem router on
2. The modem router's WAN IP is usually a dynamic IP. Please refer to
want to log in to the modem router through a domain name.
> System Tools> Administration
field blank. If you just want to allow a specific device to
(such as http://59.40.2.243).
Administrate Your Network
page. Locate the
Port as the default setting.
Basic > Network Map > Internet.
Set Up a Dynamic DNS Service Account
Remote
if you
93