Automatic Peak Level Searching - Yamaha CDC-685 Owner's Manual

AUTOMATIC PEAK LEVEL SEARCHING
II
II _ _
!!!!!!!!!!!!!!!!!!!!
8 9 10
1112
8 9 10
.. 1
1112
1;::1 ::
:::1· :::.
UllWlllllWlllll
1DISC REP
1DISC REP
1DISC
PEAK
Q
t
G ) 2 3 4 5
1:::-
E::
1:::11<:
G)2345~
1::: 1
E::
1:::11<:
G)2345~
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this repeat play.
The peak level search is performed on the disc.
II To cancel this function
Press the
0
button.
D
Press the PEAK button.
1DISC
MODE
Q
2
6
Select the "1 DISC" disc play mode.
This convenient feature automatically searches a disc for a
part where the source level peaks, and next plays the part
repeatedly. For recording to tape, this feature is very helpful
to adjust the recording level on the tape deck.
U
Stop the unit.
!J
Select the disc.
<J DISC SKIP C>
~ :~
....
\
/
,_
...
• Even if the peak level search is perfonned twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
• In the program play mode, this feature will function among
the programmed tracks only. If program play is being
perfonned, first press the
0
button, and then press the PEAK
button. If program play is not being perfonned, only press the
PEAK button.
• To search for the peak level through all discs on the disc tray,
in step 2, select the "5DISCS" disc play mode.
E-21
AUTOMATIC PEAK LEVEL SEARCHING
II
II _ _
!!!!!!!!!!!!!!!!!!!!
8 9 10
1112
8 9 10
.. 1
1112
1;::1 ::
:::1· :::.
UllWlllllWlllll
1DISC REP
1DISC REP
1DISC
PEAK
Q
t
G ) 2 3 4 5
1:::-
E::
1:::11<:
G)2345~
1::: 1
E::
1:::11<:
G)2345~
Next, the part where the source level peaks is repeatedly
played. Adjust the recording level on the tape deck
listening to this repeat play.
The peak level search is performed on the disc.
II To cancel this function
Press the
0
button.
D
Press the PEAK button.
1DISC
MODE
Q
2
6
Select the "1 DISC" disc play mode.
This convenient feature automatically searches a disc for a
part where the source level peaks, and next plays the part
repeatedly. For recording to tape, this feature is very helpful
to adjust the recording level on the tape deck.
U
Stop the unit.
!J
Select the disc.
<J DISC SKIP C>
~ :~
....
\
/
,_
...
• Even if the peak level search is perfonned twice or more on
the same disc, the same part will not be always selected,
because this unit will search for the peak level among parts
on the disc that are randomly selected by the internal
microcomputer.
• In the program play mode, this feature will function among
the programmed tracks only. If program play is being
perfonned, first press the
0
button, and then press the PEAK
button. If program play is not being perfonned, only press the
PEAK button.
• To search for the peak level through all discs on the disc tray,
in step 2, select the "5DISCS" disc play mode.
E-21