Get Started; Attach The String; Charge The Built-In Battery; Turn On/Off - Philips BT110 User Manual

3 Get started

Always follow the instructions in this
chapter in sequence.

Attach the string

For easy carrying, attach the supplied
string to this speaker as illustrated.
Charge the built-in
battery
The speaker is powered by a built-in
rechargeable battery.
Note
•
Before use, fully charge the built-in battery.
•
The micro USB socket is for charging only.
•
It takes you approximately four hours to
fully charge the battery.
•
Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
Connect the USB cable between
•
the DC IN socket on the speaker,
and
•
a USB socket on a computer.
The LED indicator indicates the battery
status.
Battery Status
Under
charging
Fully charged/
Not charging
Low battery

Turn on/off

Press and hold
turn the speaker on or off.
» When the speaker is turned on,
the LED indicator begins to flash.
» When the speaker is turned off,
the LED indicator lights off.
Note
•
When there is no operation and audio
output for 15 minutes, the speaker switches
to standby mode automatically.
LED Indicator
Red
Off (in power-off
mode);
Blue (in Bluetooth
mode)
Flashing red
for three seconds to
EN
5