Preference Features
MENU
→
System
→
Time
•
Sleep
Timer: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120,
✎
Use the ▲/▼ buttons to select a period of time, and then press ENTERE. To cancel the
Off.
Setting the On / Off Timer
→
→
MENU
System
Time
•
On
Timer: You can set up three separate
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,
Manual, you can set up the day you want to activate the timer.
The c mark indicates the day you've selected.
Time: Set the hour and minute.
Volume: Set the desired volume level.
Source: To select the source of the content that will play when the TV turns on. You can:
–
Select
TV
and have the TV display a specific
–
Select
USB
and have the TV play back photo or audio files from a USB device.
–
Select a source on your TV (HDMI1, HDMI2/DVI, AV, Component, etc.) that you have connected a set-top box
to, and have the TV display a channel from the set-top box.
✎
The USB device must be connected to your TV before you can select USB.
✎
If you select a source other than
Have a cable or satellite set-top box attached to that source
•
•
Set the set-top box to the channel you want to watch when the TV goes on
•
Leave the set-top box turned on.
Using the Sleep Timer
→
Sleep Timer
→
ENTERE
→
On Timer
<or>
Off Timer
On Timer
Terrestrial
TV
or USB, you must:
English - 54
→
ENTERE
configurations.
(On Timer
1,
Sat~Sun
or
Manual
to set at your convenience. If you select
or cable channel.
150
and
180
minutes)
Sleep
Timer, select
On Timer
2,
On Timer
3)