Time
■
O
MENUm
→ System → Time →
✎
The current time will appear every time you press the
Clock: Set the clock to use the various timer features of the TV.
•
✎
If you disconnect the power cord, you have to set the clock again.
✎
Clock Mode: Set the current time Manual or Auto.
Auto: The TV sets the current time automatically using the time from a digital channel.
•
✎
You must have cable or an antenna connected to the TV to set the time automatically.
Manual: Set the current time manually.
•
✎
Depending on the broadcast station and signal, the auto time set up may not be correct. In
this case, set the time manually.
Clock Set: Set the Date and Time.
Select Clock Set. Select Date or Time, and then press ENTERE. Use the number buttons or the
to enter numbers. Use the
✎
Available only when Clock Mode is set to Manual.
You can set the Date and Time directly by pressing the number buttons on the remote control.
O
→ System → Time → Sleep Timer →
MENUm
Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150
•
and 180 minutes).
✎
Use the
buttons to select a period of time, and then press ENTERE. To cancel the Sleep
u/d
Timer, select Off.
O
MENUm
→ System → Time → On Timer <or> Off Timer →
Set On Timer so that your TV turns on automatically at a time and on a day of your choosing.
On Timer: You can set up three separate On Timer configurations.
•
✎
You must set the clock before you can use On Timer.
Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can
choose the days you want On Timer to turn on your TV.
✎
The
mark indicates days you've selected.
c
Time: Set the hour, minute, am/pm. Use the number buttons or the
the
buttons to change entry fields.
l/r
Volume: Set the desired volume level. Use the
Source: Specify which source to dispaly when the TV turns on. The TV displays an air / cable broadcast.
USB plays photos or music files from a USB device. Selecting a source on a TV connected to a set-top box
displays the channel from the set-top box.
Setting the Time
ENTERE
buttons to move from one entry field to the next. Press
l/r
Using the Sleep Timer
ENTERE
Setting the On/Off Timer
l/r
English - 31
INFO
button.
ENTERE
buttons to enter numbers. Use
u/d
buttons to change the volume level.
buttons
u/d
ENTERE
when done.