Table 10. Removal steps of battery pack
DANGER
Use only the battery specified in the parts list for your computer. Any other battery could ignite
or explode.
Unlock the battery latch
the direction shown by arrow
When installing: Install the battery pack in the slot, and then make sure that the battery latch is in the locked position.
1020 Serial Ultrabay Enhanced device or travel bezel
For access, remove this FRU:
•
"1010 Battery pack" on page 70
Table 11. Removal steps of Serial Ultrabay Enhanced device or travel bezel
Holding the bay lock latch in the unlocked position
Ultrabay Enhanced device or the travel bezel in the direction shown by arrow
Downloaded from LpManual.com Manuals
1
. Holding the battery latch in the unlocked position
3
.
1
2
, remove the battery pack in
1
3
2
, slide the bay eject latch
3
.
.
Chapter 9
2
, and then pull out the Serial
Removing and replacing a FRU
71
Need help?
Do you have a question about the ThinkPad T510 and is the answer not in the manual?
Questions and answers