Advertisement

QQ
3 7 63 1515 0
TE
L 13942296513
■ CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .........................................................3-4
REAR PANELS ...........................................................5-6
REMOTE CONTROL PANEL ..........................................7
SPECIFICATIONS ..................................................... 7-11
INTERNAL VIEW .......................................................... 12
DISASSEMBLY PROCEDURES ............................. 13-17
UPDATING FIRMWARE .......................................... 18-21
www
.
1 0 1 1 3 6
http://www.xiaoyu163.com
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or
the appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and
specifi cations are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
x
ao
u163
y
i
Copyright © 2009
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
2 9
8
MEDIA CONTROLLER
SERVICE MANUAL
For U model
IMPORTANT NOTICE
Q Q
3
6 7
1 3
1 5
SELF-DIAGNOSTIC FUNCTION ...........................22-48
IC DATA ...................................................................49-61
PIN CONNECTION DIAGRAMS .............................62-64
BLOCK DIAGRAMS ................................................66-67
PRINTED CIRCUIT BOARDS ................................. 68-74
SCHEMATIC DIAGRAMS .......................................75-89
REPLACEMENT PARTS LIST ................................91-99
REMOTE CONTROL ................................................... 100
co
.
All rights reserved.
9 4
2 8
0 5
8
2 9
9 4
2 8
m
P.O.Box 1, Hamamatsu, Japan
animate '09.06
9 9
9 9

Advertisement

Table of Contents
loading

Summary of Contents for Yamaha YMC-700

  • Page 1: Table Of Contents

    This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel. It has been assumed that basic service procedures inherent to the industry, and more specifi cally YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
  • Page 2: To Service Personnel

    YMC-700/YMC-500 3 7 63 1515 0 ■ TO SERVICE PERSONNEL AC LEAKAGE 1. Critical Components Information WALL EQUIPMENT TESTER OR OUTLET UNDER TEST EQUIVALENT Components having special characteristics are marked must be replaced with parts having specifications equal to those originally installed.
  • Page 3: Front Panels

    YMC-700/YMC-500 3 7 63 1515 0 ■ FRONT PANELS YMC-700 Top view L 13942296513 Front view POWER indicators Side view u163...
  • Page 4 YMC-700/YMC-500 3 7 63 1515 0 YMC-500 Top view L 13942296513 Front view POWER indicators Side view u163...
  • Page 5: Rear Panels

    YMC-700/YMC-500 3 7 63 1515 0 ■ REAR PANELS YMC-700 Rear view Bottom view L 13942296513 u163...
  • Page 6 YMC-700/YMC-500 3 7 63 1515 0 YMC-500 Rear view Bottom view L 13942296513 u163...
  • Page 7: Remote Control Panel

    YMC-700/YMC-500 3 7 63 1515 0 ■ REMOTE CONTROL PANEL ■ SPECIFICATIONS RAV35 YMC-700 YMC-500 ■ Audio Section Top view Minimum RMS Output Power (Power Amp. Section) (1 kHz, 0.7 % THD, 6 ohms) FRONT L/R, CENTER, SURROUND L/R ..................
  • Page 8 YMC-700/YMC-500 3 7 63 1515 0 Harmonic Distortion (1 kHz) Mono ..................0.5 % Stereo ..................0.5 % Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Antenna Input Laboratories................ 75 ohms unbalanced ■...
  • Page 9 YMC-700/YMC-500 3 7 63 1515 0 • DIMENSIONS YMC-700 YMC-500 Top view Top view L 13942296513 Front view Front view 248 (9-3/4") 248 (9-3/4") 298 (11-3/4") 298 (11-3/4") Unit: mm (inch) Unit: mm (inch) u163...
  • Page 10 YMC-700/YMC-500 3 7 63 1515 0 • SET MENU TABLE MAIN MENU SUB-MENU PARAMETER VALUE [INITIAL VALUE ] Initial Setup Speakers Source Devices Yes / No IR flashers Speaker Auto Speaker Setup Start / Cancel Speaker Configuration Front Large / [Small]...
  • Page 11 ▲ ▶ Vertical ▲▼ HDMI Standby through [Off] / HDMI 1 / HDMI 2 / HDMI 3 Network Standby (YMC-700) [Off] / On Screen Saver Screen Saver Off / [Logos] / Photos Waiting Time 1 min to 10 min, [5 min], step 1 min...
  • Page 12: Internal View

    YMC-700/YMC-500 3 7 63 1515 0 ■ INTERNAL VIEW YMC-700 YMC-500 Top view WIFI P.C.B. (YMC-700) FM TUNER DIGITAL P.C.B. MAIN P.C.B. OPERATION (2) P.C.B. OPERATION (5) P.C.B. OPERATION (1) P.C.B. OPERATION (3) P.C.B. OPERATION (6) P.C.B. OPERATION (4) P.C.B.
  • Page 13: Disassembly Procedures

    YMC-700/YMC-500 3 7 63 1515 0 ■ DISASSEMBLY PROCEDURES YMC-700 YMC-500 (Remove parts in the order as numbered.) Disconnect the power cable from the AC outlet. 1. Removal of Top Cover Ass’y a. Remove 4 screws ( ① ), and remove the side cover L. (Fig. 1) b.
  • Page 14: A. Remove 4 Screws ( ⑥ ). (Fig

    Remove 4 screws ( ⑥ ). (Fig. 2) b. Remove 5 screw ( ⑦ ) and 5 screws ( ⑧ ). (Fig. 2) c. Remove CB363 (YMC-700) and CB381–385. (Fig. 2) d. Remove the DIGITAL P.C.B.. (Fig. 2) ⑦...
  • Page 15 YMC-700/YMC-500 3 7 63 1515 0 4. Removal of WIFI P.C.B. (YMC-700) 5. Removal of FM Tuner a. Remove the LAN antenna connector by using the U.FL a. Remove 2 screws ( ⑩ ). (Fig. 3) removing tool. (Fig. 3) b.
  • Page 16: A. Remove 4 Screws ( ⑪ ), 2 Screws ( ⑫ ) And 3 Screws ( ⑬ ). (Fig

    YMC-700/YMC-500 3 7 63 1515 0 6. Removal of MAIN P.C.B. a. Remove 4 screws ( ⑪ ), 2 screws ( ⑫ ) and 3 screws ( ⑬ ). (Fig. 4) b. Remove 6 screws ( ⑭ ) and screw ( ⑮ ). (Fig. 4) c.
  • Page 17: Ymc-700/Ymc

    YMC-700/YMC-500 3 7 63 1515 0 When checking the P.C.B.: • Put the rubber sheet and the cloth over this unit. Then place the DIGITAL P.C.B. upside down on the cloth and check them. (Fig. 5) • Reconnect all cables (connectors) that have been disconnected. Be sure to use the extension cable for servicing for the following section.
  • Page 18: Updating Firmware

    YMC-700/YMC-500 3 7 63 1515 0 ■ UPDATING FIRMWARE Note) The user memories (sound field parameters, system memory, tuner presetting, etc.) are preserved even after the firmware is written. When replacing the following parts, be sure to write the latest firmware.
  • Page 19 YMC-700/YMC-500 3 7 63 1515 0 ● Confirmation of Firmware version and Checksum Before and after writing firmware, check the firmware version and checksum by using the self-diagnostic function menu. Start up the self-diagnostic function and select R. ROM VER/SUM menu. (See “SELF-DIAGNOSTIC FUNCTION”) Using the sub-menu, have the firmware version and checksum displayed, and note down them.
  • Page 20: Ymc-700

    YMC-700/YMC-500 3 7 63 1515 0 ● Operation Procedures 1. Insert the USB storage device, in which the latest Rear view USB terminal firmware is stored, to the USB terminal located on the rear panel of this unit. (Fig. 2) Fig.
  • Page 21: Ymc-700/Ymc-500 9

    NO FILE The firmware is not found in the USB storage device. INVALID FILE The firmware is not applicable to YMC-700/YMC-500. BLOCK x ERROR The firmware writing error on Block x. 4. Start up the self-diagnostic function and select R. ROM VER/SUM menu.
  • Page 22: Self-Diagnostic Function

    YMC-700/YMC-500 3 7 63 1515 0 ■ SELF-DIAGNOSTIC FUNCTION This unit has self-diagnostic functions that are intended for inspection, measurement and location of faulty point. There are 20 main menu items, each of which has sub-menu items. Listed in the table below are menu items and sub-menu items.
  • Page 23 YMC-700/YMC-500 3 7 63 1515 0 MAIN MENU SUB MENU Code Category Function VIDEO CONVERSION 1: VIDEO INFO. 2: DEINTERLACE ON/OFF 3: CONVERSION CVBS 4: CONVERSION COMPONENT 1 (CP) 5: CONVERSION COMPONENT 2 (CP) 6: CONVERSION iPod 7: CONVERSION COMPONENT 1 (SDP)
  • Page 24 YMC-700/YMC-500 3 7 63 1515 0 MAIN MENU SUB MENU Code Category Function DEVICE ACCESS CHECK 1 6: DSP and DIR (SPI0) DEVICES access check 7: FPGA (SPI2) DEVICES access check 8: IR BLASTER (UART0) DEVICES access check DEVICE ACCESS CHECK 2 1: EXTERNAL BUS DEVICES (devices on DIGITAL P.C.B.)
  • Page 25 YMC-700/YMC-500 3 7 63 1515 0 ● Required Tools • TV with HDMI input terminal • HDMI cable ● Connection Connect this unit and TV as shown below. (Fig. 1) This unit HDMI IN L 13942296513 HDMI cable Fig. 1 ●...
  • Page 26 YMC-700/YMC-500 3 7 63 1515 0 ● Canceling Self-Diagnostic Function Before canceling self-diagnostic function, execute setting of main menu Q.FACTORY PRESET (Memory initialization inhibited or Memory initialized). In order to keep the user memory stored, be sure to select PRESET INHIBITED (Memory initialization inhibited).
  • Page 27 YMC-700/YMC-500 3 7 63 1515 0 When there is a history of protection function due to excess current PRI xxx AD value is displayed, when the protection function is working Cause: An excessive current flowed through the power amplifier.
  • Page 28 YMC-700/YMC-500 3 7 63 1515 0 When there is a history of protection function due to abnormal voltage in the power supply section PRV xxx AD value is displayed, when the protection function is working Cause: The voltage in the power supply section is abnormal.
  • Page 29 YMC-700/YMC-500 3 7 63 1515 0 ● Operation procedure of Main menu and Sub-menu There are 20 main menu items, each of them having sub-menu items. Keys of this unit Function ︿ (UP) and ﹀ (DOWN) Select Main menu and Sub-menu 〈...
  • Page 30 YMC-700/YMC-500 3 7 63 1515 0 ● Functions in Self-Diagnostic Function mode In addition to the self-diagnostic function menu items, functions as listed below are available. • Power ON/OFF • Master volume Functions related to the tuner and the setup menu are not available.
  • Page 31 YMC-700/YMC-500 3 7 63 1515 0 ● Details of Self-Diagnostic Function menu A: AUDIO CHECK Using the sub-menu, the audio input signal is selected and output. Example A: AUDIO CHECK – > 1: OPTICAL INPUT PLAYBACK (normal) NOW EXECUTING...
  • Page 32 YMC-700/YMC-500 3 7 63 1515 0 B: SPEAKER SET Using the sub-menu, the audio input signal is selected and output. Example B: SPEAKER SET – > 1: FRNT: SML NOW EXECUTING VOLUME: 25 AUDIO: ANALOG VIDEO: – – 1: FRONT : SML 0dB...
  • Page 33 YMC-700/YMC-500 3 7 63 1515 0 C: MIC CHECK This menu is used to check MIC. Example C: MIC CHECK – > 1: MIC CHECK NOW EXECUTING VOLUME: 25 AUDIO: MIC VIDEO: – – 1: MIC CHECK The signal input through the microphone is output via A/D – D/A.
  • Page 34 YMC-700/YMC-500 3 7 63 1515 0 E: USB This menu is used to check USB interface. Preparation of USB storage device Copy 2 or more music files from PC to the root folder of a USB storage device. b. Insert the USB storage device to the USB terminal of this unit.
  • Page 35 YMC-700/YMC-500 3 7 63 1515 0 F: ETHERNET (YMC-700 model) This menu is used to check the NETWORK communication. Example F: ETHERNET – > 1: INTERNAL LOOPBACK 10BaseT Result: OK VOLUME: 25 AUDIO: – – VIDEO: – – 1: INTERNAL LOOPBACK 10 BaseT...
  • Page 36 YMC-700/YMC-500 3 7 63 1515 0 G: WiFi (YMC-700 model) This menu is used to check the WiFi connection. Example G: WiFi – > 1: GET IP ADDRESS FROM DHCP SERVER IP address: xxx.xxx.xxx.xxx Subnetmask: yyy.yyy.yyy.yyy VOLUME: 25 AUDIO: – –...
  • Page 37 YMC-700/YMC-500 3 7 63 1515 0 3: CONVERSION CVBS The video signal input from VIDEO IN 3 (CVBS) is output after undergoing video up-conversion. CONVERSION CVBS DIGITAL DIGITAL DIGITAL HDMI receiver FPGA HDMI transmitter Video decoder EP2C8Q208 ADV7510 ADV7840...
  • Page 38 YMC-700/YMC-500 3 7 63 1515 0 6: CONVERSION iPod The video signal input from DOCK (iPod) is output after undergoing video up-conversion. CONVERSION iPod DIGITAL DIGITAL DIGITAL HDMI receiver FPGA HDMI transmitter Video decoder EP2C8Q208 ADV7510 ADV7840 IC331 IC321...
  • Page 39 YMC-700/YMC-500 3 7 63 1515 0 J: HDMI Using the sub-menu, the selected input signal is output to HDMI OUT. Example J: HDMI – > 1: HDMI IN1 (HDMI AUDIO = AMP) 1: HDMI IN1 (HDMI AUDIO = AMP) 4: HDMI IN1 (HDMI AUDIO = TV) The signal input from HDMI IN1 is output.
  • Page 40 YMC-700/YMC-500 3 7 63 1515 0 K: DOCK This menu is used to check the DOCK connector. Example K: DOCK – > 1: DOCK CONNECTION TEST Total Check : NG [ UART Loopback : Wrong ] [ iPAP and iPDET...
  • Page 41 YMC-700/YMC-500 3 7 63 1515 0 L: IR BLASTER This menu is used to check the IR blaster (IC383 of the DIGITAL P.C.B.) and remote control connection. Example Result No. Message L: IR BLASTER PASS – > 1: SEND KEY...
  • Page 42 YMC-700/YMC-500 3 7 63 1515 0 M: A/D DATA This menu is used to display the A/D conversion value of the microprocessor which detects panel keys of this unit and protection functions by using the sub-menu. When KEY1/KEY2 menu is selected, keys become nonoperable due to detection of the values of all keys.
  • Page 43 YMC-700/YMC-500 3 7 63 1515 0 5: IP_AP: iPAP (iPod accessory power) detection. DEST2: (Reference voltage: 3.3V=255) Model detection. Port detect: Pin No. 14 of IC382 (Reference voltage: 3.3V=255) Port detect: Pin No. 2 of IC382 iPod installed: 250 to 255...
  • Page 44 YMC-700/YMC-500 3 7 63 1515 0 P: PROTECTION HISTORY The history of protection function is displayed up to 4. Example P: PROTECTION HISTORY – > 1: DISPLAY PROTECTION HISTORY Last : PRI xxx 2nd : PRV xxx A/D value is displayed when the 3rd : PRD xxx protection function works.
  • Page 45 YMC-700/YMC-500 3 7 63 1515 0 R: ROM VER/SUM This menu is used to display the firmware version and checksum. The checksum is obtained by adding the data at every 8 bits for each program area and expressing the result as a 4figure hexadecimal data.
  • Page 46 (IC341) and PWM devices below are checked. (IC376) are checked. USB: ISP1760 (IC361) Example ETHERNET: LAN9217 (IC362) Result : OK (YMC-700 model) NPGA: NPGA(IC351) 6: DSP DEVICES L 13942296513 SDIO I/F: TE4300PF (IC366) Communication and bus line connection (YMC-700 model) between microprocessor (IC341) and DSP (IC371) are checked.
  • Page 47 YMC-700/YMC-500 3 7 63 1515 0 T: DEVICE ACCESS CHECK 2 This menu is used to display the result of check by using “S. DEVICE ACCESS CHECK 1”. Example T: DEVICE ACCESS CHECK 2 – > 1: EXTERNAL BUS DEVICES...
  • Page 48 YMC-700/YMC-500 3 7 63 1515 0 V: TUNER This menu is used to check FM tuner. INPUT select: TUNER Example V: TUNER – > 1: TUNER RANGE (LOWER) Tuning frequency:87.5MHz VOLUME: 25 AUDIO: TUNER VIDEO: – – 1: TUNER RANGE (LOWER) The tuning frequency (87.5 MHz) is selected.
  • Page 49: Ic Data

    YMC-700/YMC-500 3 7 63 1515 0 ■ IC DATA IC341: AD91089ZSKBC (DIGITAL P.C.B.) Microprocessor * No replacement part available. Event controller/ JTAG test Watch dock timer Core timer and emulation Real time clock Voltage regulator UART port IrDA® Memory...
  • Page 50 YMC-700/YMC-500 3 7 63 1515 0 Blackfin PF Ports Synchronous memory control Port Port Function Name I/O Detail of Function Function Name I/O Detail of Function Name Name 51 PF0 ADC_N_CS O AD converter chip select 65 RSCLK1 –...
  • Page 51 YMC-700/YMC-500 3 7 63 1515 0 Asynchronous memory control Real-time clock Port Port Function Name I/O Detail of Function Function Name I/O Detail of Function Name Name 158 AMS3 17 RTXI – O RTC crystal output 159 AMS2 RTC crystal input (This pin –...
  • Page 52 YMC-700/YMC-500 3 7 63 1515 0 Supplies Port Port Function Name I/O Detail of Function Function Name I/O Detail of Function Name Name VDDEXT – I/O power supply VDDINT – Core power supply – G External ground 18 VDDRTC –...
  • Page 53 YMC-700/YMC-500 3 7 63 1515 0 • Microprocessor NPGA select port IC351: MB87L8760 (DIGITAL P.C.B) NPGA PIO[31:0] Pin No. Port Name Function Name Detail of Function PIO[0] HTX_N_INT HDMI Tx interrupt PIO[1] DAMP_N_SD DAMP shutdown PIO[2] DIR_N_INT DIR interruption...
  • Page 54 YMC-700/YMC-500 3 7 63 1515 0 PI[6:0] Pin No. Port Name Function Name Detail of Function PI[0] DSP_N_IFO DSP information PI[1] 5TUNER_N_STEREO Tuner stereo PI[2] 5TUNER_N_TUNED Tuner tuned PI[3] DSP_SPI_N_RDY DSP SPI ready PI[4] 5RDS_DATA RDS data PI[5] 5RDS_RDY...
  • Page 55 YMC-700/YMC-500 3 7 63 1515 0 • Microprocessor extended port 1 IC353: 74LVC574APW (DIGITAL P.C.B.) Octal D type flip flop with 5 V tolerant inputs/outputs positive edge trigger 3-state 20 Vcc 12 Q7 11 CP Extended Ports 2 are accessed using NPGA Extended strobe function.
  • Page 56 YMC-700/YMC-500 3 7 63 1515 0 IC354: SN74AHCT574PWR (DIGITAL P.C.B.) Octal edge-triggered D-type flip-flops with 3-state outputs Pin No. Port Name Function Name Detail of Function /EXPE Extended port enable Data bus 00 Data bus 01 Data bus 02...
  • Page 57 YMC-700/YMC-500 3 7 63 1515 0 • Microprocessor extended port 2 IC356: 74LVC574APW (DIGITAL P.C.B.) Octal D type flip flop with 5 V tolerant inputs/outputs positive edge trigger 3-state 20 Vcc 12 Q7 11 CP Pin No. Port Name...
  • Page 58 YMC-700/YMC-500 3 7 63 1515 0 • Microprocessor DIR select port IC374: LC89058WD-E (DIGITAL P.C.B.) Digital audio interface receiver MOUT AUDIO XMODE Fs calculator GPIO0 Microcontroller 40 CL GPIO1 SDIN GPIO2 Cbit, Pc SLRCK GPIO3 SBCK RXOUT2 RDATA RXOUT1...
  • Page 59 YMC-700/YMC-500 3 7 63 1515 0 Port Name Function Name Detail of Function DGND – Digital GND Emphasis information II input fs monitor output II chip address MOUT – setting input pin AUDIO – Channel status bit 1 output II chip address setting input pin...
  • Page 60 YMC-700/YMC-500 3 7 63 1515 0 • Microprocessor ADC select port IC381: ADC084S021 CIMM (DIGITAL P.C.B.) 4-channel, 200 kSPS, 8-bit A/D converter 8-Bit SCLK SUCCESSIVE APPROXIMATION DOUT ADC084S021 SCLK CONTROL LOGIC DOUT AD converter Pin No. Port Name Function Name...
  • Page 61 YMC-700/YMC-500 3 7 63 1515 0 IC382: SN74LV4051APWR (DIGITAL P.C.B.) 8-channel analog multiplexers/demultiplexers INPUTS CHANNEL None Selector1 Pin No. Port Name Function Name Detail of Function DC_PRT Digital AMP DC protection DEST2 Destination 2 ADC_COM1 SPI bus COM (IC381)
  • Page 62: Pin Connection Diagrams

    YMC-700/YMC-500 3 7 63 1515 0 ■ PIN CONNECTION DIAGRAMS • ICs 74LVC00APW 74LVC125APW 74LVC1G08GW 74LVC245APW,118 74LVC3G04DP 74LVC574APW 74LVC3GU04DP 74LVC08APW 74LVC14APW 74LVC32APW ADC084S021 CIMM ADV7510BSTZ-225 ADV7840BBCZ-5 AD91089ZSKBC BA00JC5WT-V5 BA4510F-E2 D70YE101BRFP266 EP2C8Q208C8N MB87L8760 L 13942296513 BD9781HFP-TR FA5511N-D1-TE1 ISP1760BE K4S560832J-UC75000 K8P6415UQB-PI4B000...
  • Page 63 YMC-700/YMC-500 3 7 63 1515 0 NJM2386DL3-05 (TE1) NJM2580M (TE2) NJM2867F3-05 NJM2904M (TE3) NJM431U 1: VIN 2: ON/OFF control 3: VOUT 1: REFERENCE 4: N.C. 2: ANODE 5: GND 3: CATHODE NJM4565M (TE1) NJM7805FA NJM78M05FA NJM78M12FA NJM79M05FA PCM1803DBR 3: IN...
  • Page 64 YMC-700/YMC-500 3 7 63 1515 0 • Diodes 1SS355 D1FK60-5063 D1NL20U-5083 D5SBA60 KDS160-RTK D1FL20U-5063 Anode Anode Anode ANODE – Cathode + AC Cathode CATHODE Cathode MAZ8030GLL 2.9V P6KE200ARL PD413PI2E00F RB050L-40 RB051L-40 MAZ8047GLL 4.6V RB160L-40 TE25 MAZ8051GML 5.1V MAZ8110GLL 10.7V MAZ8270GML 27.0V...
  • Page 65 YMC-700/YMC-500 3 7 6 3 1 5 1 5 0 MEMO MEMO 1 3 9 4 2 2 9 6 5 1 3 w w w u 1 6 3...
  • Page 66: Block Diagrams

    YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 ■ BLOCK DIAGRAMS DIGITAL P.C.B. Section Block Diagram → Data Line Power off during standby mode DIGITAL I2C Bus SCHEMATIC DIAGRAM Control Line SDRAM M12L64164A-5TG IC332 HDMI IN 1...
  • Page 67 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 AUDIO/VIDEO/POWER SUPPLY Sections Block Diagram ANALOG AUDIO POWER SUPPLY POWER TRANSFORMER +30A DIR/DSP etc AC IN To DIGITAL AMPLIFIER AMP_GND DAMP_N_OTW IC10 +13V DAMP_N_SD B1879D TPS54331 DIGITAL...
  • Page 68: Printed Circuit Boards

    YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 ■ PRINTED CIRCUIT BOARDS • Semiconductor Location POINT A XL311 (AC20 of IC311) POINT B XL312 (D22 of IC311) POINT C XL331 (Pin 1 of IC334) POINT D XL341 (Pin 10 of IC341) DIGITAL P.C.B.
  • Page 69 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 POINT E 1 / R4429 (+3.3EX), 2 / Pin 13 of IC341 DIGITAL P.C.B. (Side B) R4429 R4429 R4429 (+3.3EX) (+3.3EX) (+3.3EX) IC341 2 IC341 2 IC341 2...
  • Page 70 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 OPERATION (1) P.C.B. OPERATION (2) P.C.B. OPERATION (5) P.C.B. (Side A) (Side A) (Side A) JK151 STANDBY/ON YPAO MIC VOLUME SW191 MAIN POWER indicator POWER indicator PSW_N_ON...
  • Page 71 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 OPERATION (1) P.C.B. OPERATION (2) P.C.B. OPERATION (5) P.C.B. (Side B) (Side B) (Side B) IC161 1 3 9 4 2 2 9 6 5 1 3 OPERATION (4) P.C.B.
  • Page 72 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 AUDIO IN 3 SPEAKERS VIDEO IN FRONT SURROUND CENTER OUTPUT VIDEO IN MAIN P.C.B. MAIN P.C.B. (Side A) (Side A) Cb/Pb Cr/Pr WOOFER No replacement part available.
  • Page 73 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 MAIN P.C.B. MAIN P.C.B. (Side B) 1 3 9 4 2 2 9 6 5 1 3 • Semiconductor Location Ref No. Location D1001 D1002 D2503 w w w...
  • Page 74 YMC-700/YMC-500 YMC-700 3 7 6 3 1 5 1 5 0 WIFI P.C.B. WIFI P.C.B. (Side A) (Side B) DIGITAL (CB363) CB601 IC602 IC601 1 3 9 4 2 2 9 6 5 1 3 No replacement part available.
  • Page 75: Schematic Diagrams

    YMC-700/YMC-500 SCHEMATIC DIAGRAMS YMC-700 YMC-500 DIGITAL 1/8 POINT A XL311 (AC20 of IC311) POINT B XL312 (D22 of IC311) HDMI IN HDMI RECEIVER No replacement part available. CB313 CB312 CB311 IC311 to DIGITAL 4/8 to DIGITAL 5/8 to DIGITAL 8/8...
  • Page 76 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 2/8 HDMI OUT IC321: ADV7510BSTZ-225 Low power HDMI 1.3 compliant transmitter CEC Controller/ Buffer S/PDIF S[3:0] HDCP DSD[5:0] Audio Keys MCLK Data LRCLK Capture 4:2:2 SCLK HDCP CB321 DSD_CLK Encryption 4:4:4 D[35:0] Color VSYNC Video...
  • Page 77 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 3/8 to DIGITAL 2/8 to DIGITAL 2/8 to DIGITAL 4/8 IC333 to DIGITAL 4/8 to DIGITAL 5/8 FPGA to DIGITAL 5/8 to DIGITAL 4/8 to DIGITAL 5/8 IC331 to DIGITAL 1/8 to DIGITAL 5/8 to DIGITAL 6/8...
  • Page 78 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 4/8 to DIGITAL 8/8 IC341: AD91089ZSKBC Microprocessor JTAG test Event controller/ IC347 IC346 IC348 IC446 IC447 Watch dock timer and emulation Core timer IC347 Real time clock Voltage regulator to DIGITAL 5/8 UART port IrDA®...
  • Page 79 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 5/8 to DIGITAL 8/8 to DIGITAL 6/8 to DIGITAL 3/8 to DIGITAL 7/8 to DIGITAL 4/8 to DIGITAL 6/8 IC353 to DIGITAL 3/8 to DIGITAL 5/8 to DIGITAL 8/8 IC354 to DIGITAL 7/8 to DIGITAL 8/8...
  • Page 80 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 6/8 to DIGITAL 5/8 to DIGITAL 4/8 IC367 SDIO I/F IC366 Page 89 CB363 to WIFI_CB601 (YMC-700) to DIGITAL 5/8 to DIGITAL 5/8 ETHERNET IC362 to DIGITAL 6/8 to DIGITAL 4/8 USB HOST IC361 to DIGITAL 5/8 No replacement part available.
  • Page 81 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 7/8 to DIGITAL 5/8 IC376: TAS5086DBT PWM processor POINT H XL371 (Pin 29 of IC374) DVDD DVSS DVSS_ESD VR_DIG Power VR_ANA L’ PWM1 Supply VR_OSC VR_ANA PWM_1 AVDD AVSS_PLL AVDD PWM_2 VREG_EN R’ PWM2 IC379...
  • Page 82 YMC-700/YMC-500 YMC-700 YMC-500 DIGITAL 8/8 REMOTE CONTROL OUT1/2 OUT3/IN POINT J XL381 (Pin 7 of IC383) JK381 JK382 to DIGITAL 5/8 to DIGITAL 5/8 to DIGITAL 4/8 IR BLASTER IC383 CONVERTER IC381 IC384 to DIGITAL 4/8 to DIGITAL 7/8...
  • Page 83 YMC-700/YMC-500 YMC-700 YMC-500 OPERATION Destination detection for A/D port Pull-up resistance 10 k-ohms Page 86 KEY1 -5.1 to MAIN_W1000 +2.2k +4.7k +8.2k +27.0k JK151 0 – 0.05 0.52 – 0.67 1.27 – 1.42 1.92 – 2.07 2.60 – 2.76...
  • Page 84 YMC-700/YMC-500 YMC-700 YMC-500 MAIN 1/5 POWER TRANSFORMER (59.5) (163.7) (163.4) 28.0 AC IN (59.8) 18.1 (163.4) (233.2) (233.2) 18.1 (163.3) (1.6) to MAIN 3/5 (1.7) 18.0 (15.4) 18.0 (2.2) (4.0) 18.0 18.0 12.0 (4.0) (2.6) 18.0 (1.3) 12.0 IC14 (1.3)
  • Page 85 YMC-700/YMC-500 YMC-700 YMC-500 MAIN 2/5 IC51-53: TAS5342LDDV 100 W stereo digital amplifier power stage WOOFER Under- IC54 to MAIN 3/5 IC54 voltage Protection Internal Pullup VREG VREG -5.0 -5.0 Resistors to VREG Power -5.0 Reset AGND Protection I/O Logic Temp.
  • Page 86 YMC-700/YMC-500 YMC-700 YMC-500 MAIN 3/5 IC104: TC74HC4052AF W1000 Analog multiplexer/demultiplexer Page 83 -5.0 to OPERATION (2)_CB151 INPUT INHIBIT 0x, 0y LEVEL BINARY TO 1-OF-4 1x, 1y SELECTOR WOOFER CONVERTER DECODER WITH INHIBIT 2x, 2y 3x, 3y NONE SUBWOOFER OUTPUT...
  • Page 87 YMC-700/YMC-500 YMC-700 YMC-500 MAIN 4/5 to MAIN 3/5 IC201 INPUT SELECTOR VIDEO IN IC201 IC201 W2001 to MAIN 3/5 Page 82 to DIGITAL_CB382 to MAIN 3/5 to MAIN 5/5 IC201: TC74HC4053AF IC202: NJM2580M (TE2) Analog multiplexer/demultiplexer Single supply wide band 3 ch video amplifier...
  • Page 88 YMC-700/YMC-500 YMC-700 YMC-500 MAIN 5/5 to MAIN 3/5 DOCK to MAIN 4/5 No replacement part available. to MAIN 3/5 w w w ★ All voltages are measured with a 10MΩ/V DC electronic voltmeter. ★ Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed.
  • Page 89 YMC-700/YMC-500 YMC-700 WIFI IC602 CB601 IC601 No replacement part available. Page 80 to DIGITAL_CB363 IC602: R1172S331B-E2-F CMOS-based positive-voltage regulator IC Vref Current Limit Pin No. Symbol Description Output Pin of Voltage Regulator 2, 5 Ground Pin Chip Enable Pin...
  • Page 90: Replacement Parts List

    YMC-700/YMC-500 3 7 63 1515 0 ■ REPLACEMENT PARTS LIST • ELECTRICAL COMPONENT PARTS WARNING ● Components having special characteristics are marked and must be replaced with parts having specifications equal to those originally installed. ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS: C.A.EL.CHP...
  • Page 91 YMC-700/YMC-500 YMC-700 YMC-500 3 7 63 1515 0 P.C.B. DIGITAL Ref No. Part No. Description Markets Ref No. Part No. Description Markets WR116700 P.C.B. DIGITAL (700) * C3219 US625100 C.CE.CHP 0.100uF WR117000 P.C.B. DIGITAL (500) C3220 US634100 C.CE.CHP 0.01uF CB311-313 WM462600 CN.HDMI...
  • Page 92 YMC-700/YMC-500 YMC-700 YMC-500 3 7 63 1515 0 P.C.B. DIGITAL Ref No. Part No. Description Markets Ref No. Part No. Description Markets * C3474 US625100 C.CE.CHP 0.100uF * C3727 US625100 C.CE.CHP 0.100uF * C3475-3476 WE475400 C.EL 100uF 6.3V * C3729-3735 US625100 C.CE.CHP 0.100uF...
  • Page 93 YMC-700/YMC-500 YMC-700 YMC-500 3 7 63 1515 0 P.C.B. DIGITAL Ref No. Part No. Description Markets Ref No. Part No. Description Markets * C3870 WR058500 C.EL.CHP 1000uF 6.3V * IC321 YA488A00 IC ADV7510BSTZ-225 * C3871 US625100 C.CE.CHP 0.100uF IC323...
  • Page 94 YMC-700/YMC-500 YMC-700 YMC-500 3 7 63 1515 0 P.C.B. DIGITAL, P.C.B. OPERATION and P.C.B. MAIN Ref No. Part No. Description Markets Ref No. Part No. Description Markets * XL361 WQ853200 RESONATOR 25MHz (700) D1701 WF877600 DIODE.PHOT PD413PI XL362 WG538400 RSNR.CRYS...
  • Page 95 YMC-700/YMC-500 YMC-700 YMC-500 3 7 63 1515 0 P.C.B. MAIN Ref No. Part No. Description Markets Ref No. Part No. Description Markets US065100 C.CE.CHP 0.1uF 50V B C635-636 US135100 C.CE.CHP 0.1uF C41-42 V9885300 C.CE.CHP 10uF C637 UR866100 C.EL US035100 C.CE.CHP 0.1uF...
  • Page 96 YMC-700/YMC-500 YMC-700 YMC-500 YMC-700 3 7 6 3 1 5 1 5 0 P.C.B. MAIN P.C.B. WIFI Carbon Resistors Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No. Ref No.
  • Page 97 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 • OVERALL ASS'Y 200-1 51 52 1 3 9 4 2 2 9 6 5 1 3 7 (3) Front panel unit 32 (C) 32 (D) 32 (A)
  • Page 98 YMC-700/YMC-500 YMC-700 YMC-500 3 7 6 3 1 5 1 5 0 • FRONT PANEL UNIT Ref No. Part No. Description Remarks Markets WR117400 P.C.B. ASS'Y MAIN 1-11 WR116700 P.C.B. ASS'Y DIGITAL 1-11 WR117000 P.C.B. ASS'Y DIGITAL WR117700 P.C.B. ASS'Y...
  • Page 99: Remote Control

    YMC-700/YMC-500 3 7 6 3 1 5 1 5 0 ■ REMOTE CONTROL SCHEMATIC DIAGRAM KEY NO. LAYOUT KEY CODE Key no. Key name Custom code Data code Operational object These PADs are test point for ISP in the production line...
  • Page 100 YMC-700/YMC-500 3 7 63 1515 0 MEMO L 13942296513 u163...
  • Page 101 3 7 63 1515 0 YMC-700/YMC-500 L 13942296513 u163...

This manual is also suitable for:

Ymc-500

Table of Contents