Page 1
WMS 40 SD_07_Hex 12/20/2007 11:25 Seite 1 (Schwarz/Black Auszug) WMS 40 SINGLE WMS 40 DUAL BEDIENUNGSANLEITUNG S. 5 ... . . Bitte vor Inbetriebnahme des Gerätes lesen! USER INSTRUCTIONS p. 14 .
Shielded cables and I/O cords must be used for this equipment to comply with the relevant FCC regulations. Changes or modifications not expressly approved in writing by AKG Acoustics may void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Never use caustic or scouring cleaners or cleaning agents containing alco- hol or solvents since these may damage the enamel and plastic parts. 11.Use the equipment for the applications described in this manual only. AKG cannot accept any liability for damages resulting from improper handling or misuse.
• Check that the packaging contains all of the items listed for your system. Should any item be missing, please con- tact your AKG dealer. 2.3 Optional Accessories • For optional accessories, refer to the current AKG catalog or folder, or visit www.akg.com. Your dealer will be glad to help. 2.4 SR 40 SINGLE/DUAL Receivers The SR 40 SINGLE/DUAL series includes two stationary receivers for use with all WMS 40 and Microtools Series trans- mitters.
865 MHz UHF carrier frequency range and uses an antenna integrated in the body. The microphone element permanently mounted on the transmitter uses a high quality cardioid transducer from AKG. It provides low handling noise sensitivity, high gain before feedback, and brilliant sound quality, as well as a built-in wind and pop filter to reduce wind and breath noise.
• C 516 ML, C 518 ML, C 519 ML • The MKG L guitar cable from AKG lets you connect an electric guitar, electric bass, or remote keyboard to the body- pack transmitter. One or two MKG L guitar cables, respectively, are included in the Instru mental Set SINGLE and In- strumental Set DUAL.
The PT 40 PRO bodypack transmitter has been designed for use with the CK 55 L, C 417 L, C 520 L, C 555 L, 3.7 Setting Up the Bodypack C 516 ML, C 518 ML, and C 519 ML microphones from AKG. If you wish to connect other microphones from AKG or Transmitter other manufacturers to the PT 40 PRO, please note that you may have to rewire the existing connector of your micro- phone or replace it with a 3-pin mini XLR connector.
• You can adjust the microphone to conform exactly to the shape of the user’s head. For details, refer to the C 555 L instruction manual which you can download from www.akg.com. • Should you hear excessive pop noise ("p" and "t" sounds are overemphasized unnaturally), move the microphone capsule further away from your mouth (up or back).
WMS 40 SD_07_Hex 12/20/2007 11:26 Seite 21 (Schwarz/Black Auszug) 5 Cleaning • Use a soft cloth moistened with water to clean the receiver and transmitter surfaces. 5.1 Surfaces 1. Unscrew the wire-mesh cap of the handheld transmitter CCW and remove the wire-mesh cap from the transmitter. 5.2 Handheld Transmitter 2.
22 x 30 x 98 mm (0.8 x 1.2 x 3.8 in.) Net weight 36 g (1.3 oz.) This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the Declaration of Conformity, visit http://www.akg.com or contact sales@akg.com. WMS 40 SINGLE/DUAL...
Need help?
Do you have a question about the WMS40 SINGLE and is the answer not in the manual?
Questions and answers