Table of Contents
Advertisement
First time installation
General information
Once you have correctly connected the Mediamaster, you also
have to perform a "First time installation."
During this procedure, helpful information is displayed at the bot-
tom of the menus.
Please note!
The select button always confirms a selection within these
menus, and pressing it will take you to the next step in the instal-
lation process. However, and this is important, often more than
one value has to be entered in a menu. First, perform all neces-
sary settings on the different lines. Then, confirm them all simul-
taneously by pressing select.
You can always go back to the previous menu by pressing back.
Use cursor up/down to move upwards and downwards from
one line to another.
Use cursor left/right to change settings.
You can also use the numeric buttons on the remote control to
enter numeric values.
Switching on for the first time and start
the "First time installation"
• Plug in your Mediamaster
• The "First time installation" menu is shown.
• Press select to continue.
Language
• Select the desired menu language with cursor up/down.
This will also become the main language for audio and subti-
tling.
• When you now press select again to confirm your choice of
language, you simultaneously start the searching for TV/Radio
channels.
GB 16
Advertisement
Table of Contents
