IMPORTANT SAFETY INSTRUCTIONS For Household Use Only WHEN USING YOUR SHARK STEAM MOP, ® WARNING: BASIC SAFETY PRECAUTIONS SHOULD TO REDUCE THE RISK OF FIRE, ELECTRIC ALWAYS BE FOLLOWED, INCLUDING THE SHOCK OR INJURY: FOLLOWING: 1 Use the system only for its intended use.
Page 3
14 DO NOT put any objects into openings. Do not use 27 Store steam mop indoors in a cool, dry place. with any opening that is blocked. 28 To avoid circuit overload, do not operate another 15 DO NOT put hands or feet under the steam mop. Unit appliance on the same socket (circuit) as the steam gets very hot.
Page 4
This appliance complies with the WEEE-Directive 2012/19/EU on the disposal of electrical and electronic equipment (WEEE). This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material sources.
Contents Thank you for Getting Started ..................... 5 purchasing the Using Your Light & Easy Steam Mop ..............8 ™ Shark Light & ® Care of Your Light & Easy Steam Mop ..............11 ™ Easy Steam Troubleshooting ....................12 ™...
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark Light & Easy Steam Mop.
Page 7
fig. 3 fig. 2 Insert the assembled handle piece into the steam IMPORTANT: Never use the Light & Easy ™ mop base. Push the tube base together until you Steam Mop without attaching a microfibre hear a click. (fig. 2) cleaning pad to avoid damage to your floor and mop.
Page 8
Getting Started Calcium and mineral deposits can build up and Your microfibre cleaning pads should be replaced impact the performance of your steam mop every 3 months to maximize cleaning performance. over time. To extend the life of your product we recommend that you use distilled water.
Using Your Light & Easy Steam Mop ™ When you use your steam mop for the first time or if you have not used the unit in awhile, it may take a minute or two for the water to travel through the pump and into the heater to create steam.
Page 10
Using Your Light & Easy Steam Mop - cont. ™ If your Light & Easy Steam Mop stops ™ steaming, it could be out of water. Unplug the power cord from the electrical outlet and refill the water tank at anytime. fig.
Page 11
Care of Your Light & Easy Steam Mop ™ fig. 10 fig. 11 AFTER USE AND STORAGE To store the cooled Shark Light & Easy Steam ® ™ Mop, hang on a large hook. (fig. 11) When you have finished using the Light & Easy ™...
Care of Your Light & Easy Steam Mop ™ fig. 12 fig. 13 40° CARE OF YOUR MICROFIBRE CLEANING If there are loose threads on the microfibre cleaning pad carefully cut the thread with scissors. Don’t pull PADS on them or cut at the base. (fig. 13) 1 We recommend washing your microfibre cleaning IMPORTANT: The microfibre cleaning pad may pads separately from other fabrics to avoid picking...
Trouble Shooting PROBLEM POSSIBLE REASONS & SOLUTIONS Your steam mop should be securely plugged into an electrical outlet only. The Light & Easy Steam Mop ™ will not turn-on. Check your fuse or breaker. Light & Easy Steam Mop will Is there water in the water tank? If not, add water to your steam mop following ™...
(as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. PRODUCT REGISTRATION Please visit www.sharkninjamanuals.com or call 1-800-798-7398 to register your new Shark product within ten ®...
Page 15
(as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. PRODUCT REGISTRATION Please visit www.sharkninjamanuals.com or call 1-800-798-7398 to register your new Shark product within ten ®...
Need help?
Do you have a question about the S3251 Series and is the answer not in the manual?
Questions and answers