● How to use [eHELP] (p. 17) Thank you for purchasing this Panasonic product. Please read these instructions carefully before operating this product and retain them for future reference. Please carefully read the “Safety Precautions” of this manual before use.
Page 2
● For information about the trademarks, refer to [eHELP] (Support > Licence). The illustration for TX-49DX600B is used in this manual unless otherwise mentioned. Illustrations shown may be different depending on the model. Contents Be Sure to Read Important Notice 3 Safety Precautions 3 Quick Start Guide Accessories 7...
10 amp rating and that it is Panasonic has no authority to and does not grant approved by ASTA or BSI to BS1362. you that permission and explicitly disclaims any right,...
Page 4
Do not insert foreign objects into the TV through the air vents. ● Do not use an unapproved pedestal / mounting equipment. Be sure to ask your local Panasonic dealer to perform the setup or installation of approved wall-hanging brackets. ●...
Page 5
To avoid malfunctions or slow physically damaged. If this occurs, contact your response caused by radio wave interference when nearest Panasonic dealer immediately. using the built-in wireless LAN, keep the TV away ● During setup, make sure that all screws are securely from other devices that use 2.4 GHz and...
Page 6
Declaration of Conformity (DoC) ● If you hear a drumming noise in your ears, turn down “Hereby, Panasonic Corporation declares that this TV is the volume or temporarily stop using the headphones. in compliance with the essential requirements and other ■...
Page 9
■ <Style2> Removing the pedestal from the TV Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the 1 Remove the assembly screws from the TV. 2 Pull out the pedestal from the TV. 3 Remove the assembly screws from the bracket.
Connections Basic connections ■ Mains lead ● External equipment and cables shown are not supplied with this TV. ● Please ensure that the unit is disconnected from the AC 220-240 V mains socket before attaching or disconnecting any 50 / 60 Hz cables.
■ Satellite receiver Connections for 4K compatible equipment HDMI cable 4K compatible equipment HDMI cable ● Connect the 4K compatible equipment to HDMI terminal using a 4K compatible cable and you can RF cable watch content in 4K format. Satellite receiver ●...
■ Amplifier (listening with external speakers) Other connections ● Use HDMI2 to connect the TV to an amplifier which ■ DVD Player has ARC (Audio Return Channel) function. (COMPONENT equipment) If connecting to an amplifier without ARC function, use DIGITAL AUDIO. ●...
■ Common Interface ● Turn the TV off with Mains Power On / Off switch whenever inserting or removing the CI module. ● If a smart card and a CI module come as a set, first insert the CI module, then insert the smart card into the CI module.
Identifying Controls 8 [Option Menu] ● Easy optional setting for viewing, sound, etc. 9 Coloured buttons (red-green-yellow-blue) ● Used for the selection, navigation and operation of Remote Control various functions. 10 Volume Up / Down 11 Numeric buttons ● Changes channel and teletext pages. ●...
Page 15
■ Installing / Removing batteries Indicator / Control panel ● When pressing 4, 5, 6 buttons, the control panel guide appears on the right side of the screen for Pull open 3 seconds to highlight which button has been pressed. Hook Close Note the correct...
First time Auto Setup If tuning has failed check the RF cable, and the network connection, and then follow the on-screen instructions. Note ● The TV goes into Standby mode when no operation When the TV is turned on for the first time, it will is performed for 4 hours if [Auto Standby] in the Timer automatically search for available TV channels and give Menu is set to [On].
Watching TV How to Use eHELP [eHELP] is the detailed operating instructions built into Turn power on the TV, and gives a more detailed explanation for a better understanding of the operation of each feature. (TV) Display [eHELP] (Remote Control) ●...
Are the batteries installed correctly? to your local electrical retailer, contact your local ● Has the TV been switched on? Panasonic dealer or visit freeview.co.uk/retune ● The batteries may be running low. Replace them with Re-tuning only takes a few minutes, just follow the new ones.
Maintenance Specifications ■ First, remove the mains plug from the mains socket. Model No. : TX-40DX600B Display panel, Cabinet, Pedestal 40-inch model : TX-49DX600B 49-inch model Regular care: : TX-55DX600B 55-inch model Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to remove dirt or Dimensions (W ×...
Connection terminals PAL 525/60 Playback of NTSC tape from some PAL Video AV input (COMPONENT / VIDEO) recorders (VCR) or NTSC disc playback from DVD VIDEO player and recorder RCA PIN Type × 1 1.0 V[p-p] (75 Ω) M.NTSC AUDIO L - R Playback from M.NTSC Video recorders (VCR) RCA PIN Type ×...
Page 21
■ When using the wall-hanging bracket Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket. ● Holes for wall-hanging bracket installation Rear of the TV 40-inch model a: 200 mm b: 200 mm 49-inch model 55-inch model...
Page 24
• Or go on line through our Internet Accessory ordering application at www.pas-europe.com. • Most major credit and debit cards accepted. • All enquiries transactions and distribution facilities are provided directly by Panasonic UK. • It couldn’t be simpler! • Also available through our Internet is direct shopping for a wide range of finished products. Take a browse on our website for further details.
Need help?
Do you have a question about the TX-40DX600B Viera and is the answer not in the manual?
Questions and answers