Table of Contents
Advertisement
S e t t i n g s
Time and date settings
Press Menu, and select
Settings
•
Clock — SelectShow clock
to the correct time,
Time zone
The clock functions for Messages,
If the battery is removed from the phone for a long time or if the battery is discharged completely, you may need to set
the time again.
• Date — Select
Show date
mode. Select
Set the date
•
Auto-update of date & time
the current time zone. Select
The automatic update of the date and time does not change the time you have set for the alarm clock, calendar, or alarm
notes. Auto-updating may cause some alarms you have set to expire. For more information on availability, contact your
service provider or network operator.
Personal shortcuts
You can use the right selection key and voice commands to quickly access the functions you use most often.
To select a function for the right selection key and add voice commands for some functions, press Menu, and select
→
Personal
shortcuts.
• To select a function for the right selection key, select
• To add voice commands, select
voice tag, and press Add. You can add voice tags for up to ten functions of your choice. If the selected function has a voice
tag, the indicator
is shown. To activate a voice command, Note that during a call, or when an application using the (E)
GPRS connection is sending or receiving data, you cannot activate a voice command or add a voice tag.
Connectivity
Infrared
You can set up the phone to send and receive data through its infrared (IR) port. You can send or receive data (such as
business cards) to or from a compatible phone or data device (such as a computer) using the IR port of your phone.
Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This device is a Class 1 laser
product.
To use an IR connection, the compatible device with which you want to establish a connection must be IrDA compliant.
Sending and receiving data using IR
1. Ensure that the IR ports of the sending and receiving devices are pointing at each other and that there are no
obstructions between the devices. The preferable distance between the two devices in an infrared connection is 1 meter
(3.28 feet).
2. To activate the IR port of your phone to receive data using IR, press Menu, and select
3. The user of the sending device selects the desired IR function to start the data transfer.
If the data transfer is not started within 2 minutes after the activation of the IR port, the connection is canceled and must be
restarted.
IR connection indicator
• When
is shown continuously, the IR connection is active, and your phone is ready to send or receive data using its IR
port.
• When
blinks, your phone is trying to connect to the other device, or a connection has been lost.
GPRS
General packet radio service (GPRS) is a network service that allows mobile phones to be used for sending and receiving data
over an Internet protocol (IP) -based network. GPRS enables wireless access to data networks such as the Internet.
Enhanced GPRS (EGPRS), uses enhanced data rates for global evolution (EDGE), a radio interface modulation technique, to
increase the data rates of GPRS.
The functions of your phone that may use (E)GPRS are messaging, browsing pages, e-mail, remote synchronization,
application downloading, and the PC dialup (for example, Internet and e-mail).
Before you can use (E)GPRS technology:
Copyright © 2004 Nokia. All Rights Reserved.
→
Time and date
settings.
(or
Hide
clock) to show (or hide) the clock in standby mode. Select
to set the correct time zone, and
Call
register,
Alarm
(or
Hide
date) and the date is shown (or hidden) on the display when the phone is in standby
to set the date. You can also select the date format and date separator.
(network service) — Select
Confirm first
to set the phone to ask for a confirmation before the update.
Voice commands
and a command folder. Select a function to which you want to add a
Time format
to select the 12-hour or 24-hour format.
clock, timed Profiles, Calendar, Notes, and the screen saver.
On
to set the phone to automatically update the time and date in
Right selection
key. Scroll to a function and select it.
38
Set the time
to adjust the clock
→ Infrared.
Settings
Settings
Advertisement
Table of Contents
