Set Your Station Id - Brother MFC-L5700DN Online User's Manual
Hide thumbs
Also See for MFC-L5700DN:
- Reference manual (31 pages) ,
- User manual (705 pages) ,
- Service manual (408 pages)
Table of Contents
Advertisement
Home >
Machine Settings
Your Station ID
Set Your Station ID
Related Models: MFC-L5700DN/MFC-L5750DW/MFC-L6800DW/MFC-L6900DW
Set the machine to print your Station ID and the fax's date and time at the top of each fax you send.
1. Press
[Settings] > [All Settings] > [Initial Setup] > [Station ID] > [Fax].
2. Enter your fax number (up to 20 digits) using the LCD, and then press [OK].
3. Press [Tel].
4. Enter your telephone number (up to 20 digits) using the LCD, and then press [OK].
5. Press [Name].
6. Enter your name (up to 20 characters) using the LCD, and then press [OK].
•
Press
may differ depending on your country.)
•
If you enter an incorrect character, press d or c to move the cursor to it and press
correct character.
•
To enter a space, press [Space] or c.
•
For more information, see Related Information.
7. Press
.
Related Information
•
General Settings
•
How to Enter Text on Your Brother Machine
•
Transfer Faxes to Another Fax Machine
•
Transfer the Fax Journal Report to Another Fax Machine
>
Change Machine Settings from the Control Panel
to cycle between letters, numbers and special characters. (The characters available
>
General Settings
> Set
. Press the
601
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-L5700DN and is the answer not in the manual?
Questions and answers
COPIES VERY LIGHT TONER IS FULL DRUM UNIT IS NEW
Copies on the Brother MFC-L5700DN may be very light despite having a full toner and a new drum unit due to the following reasons:
- Toner Save Mode: It may be turned on. Turn it off in the machine’s settings or printer driver.
- Drum Unit Needs Cleaning: Clean the drum unit and the corona wire.
- Environmental Conditions: High temperatures and humidity can affect print quality. Ensure the machine is in an appropriate environment.
If the issue persists, further troubleshooting may be needed.
This answer is automatically generated