Brother MFC-L5700DN Online User's Manual page 354
Hide thumbs
Also See for MFC-L5700DN:
- Reference manual (31 pages) ,
- User manual (705 pages) ,
- Service manual (408 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Push Method of Wi-Fi Protected Setup
Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-
Fi Protected Setup
Related Models: DCP-L6600DW/MFC-L5750DW/MFC-L6800DW/MFC-L6900DW
If your mobile device supports WPS (PBC; Push Button Configuration), follow these steps to configure a Wi-Fi
Direct network.
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
1. Press [
] [Settings] > [All Settings] > [Network] > [Wi-Fi Direct] > [Group Owner].
2. Press [On].
3. Swipe up or down or press a or b to select the [Push Button] option. Press [Push Button].
4. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device. Then Press [OK].] appears on
the machine's LCD. Press [OK] on your Brother machine.
This will start the Wi-Fi Direct setup. To cancel, press
5. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup. For more information on printing from or scanning to your mobile device, go to
your model's Manuals page on the Brother Solutions Center at
Scan Guide for Brother iPrint&Scan.
Related Information
•
Configure Your Wi-Fi Direct Network
•
Wi-Fi Direct Network Configuration Overview
™
(WPS)
™
(WPS)
> Configure Your Wi-Fi Direct Network Using the One-
.
support.brother.com
>
Use
to see the Mobile Print/
347
Advertisement
Table of Contents
Need help?
Do you have a question about the MFC-L5700DN and is the answer not in the manual?
Questions and answers
COPIES VERY LIGHT TONER IS FULL DRUM UNIT IS NEW
Copies on the Brother MFC-L5700DN may be very light despite having a full toner and a new drum unit due to the following reasons:
- Toner Save Mode: It may be turned on. Turn it off in the machine’s settings or printer driver.
- Drum Unit Needs Cleaning: Clean the drum unit and the corona wire.
- Environmental Conditions: High temperatures and humidity can affect print quality. Ensure the machine is in an appropriate environment.
If the issue persists, further troubleshooting may be needed.
This answer is automatically generated