Table of Contents
Advertisement
Location information
You can automatically add capture location
information to the file details of the captured
material. For example, in the Photos application you
can then view the location where an image was
captured.
To add location information to all captured
material, in Camera, select
Record location
> Yes.
Location information indicators at the bottom of
the display:
— Location information unavailable. GPS
●
stays on in the background for several minutes.
If a satellite connection is found and the indicator
changes to
within that time, all the images
and video captured during that time are tagged
based on the received GPS positioning
information.
— Location information is available. Location
●
information is added to the file details.
See "Still image camera settings", p. 86.
Files with location information are indicated by
in the Photos application.
After taking a picture
After you take a picture, select from the following
options in the active toolbar (available only if
Options
Settings
>
>
Show
captured image
is enabled in the still image
camera settings):
If you do not want to keep the image, select
●
Delete
( ).
To send the image using a multimedia message,
●
e-mail, or other connection methods, such as
Bluetooth connectivity, press the call key, or
select
Send
(
).
See "Write and send
messages", p. 118.
If you are in a call, select
To add the image to an album, select
●
album
To view information about the image, select
●
Details
To send the image to a compatible online album,
●
select
(available only if you have set up an
account for an album).
videos online ", p. 96.
To zoom in an image after taking it, select
Options
Go to Photos
>
use the zoom key on the side of your device.
To use the image as wallpaper in the active standby
mode, select
Options
>
To set the image as a call image for a contact, select
Options
Assign to
contact.
>
Send to caller
(
).
Add to
See " Share images and
to open the image, and
Set as
wallpaper.
81
Advertisement
Table of Contents
