Make Calls; Voice Calls; Options During A Call - Nokia 002F4W8 User Manual

Make calls

Voice calls

1. In the standby mode, enter the phone number,
including the area code. To remove a number,
press C.
For international calls, press * twice for the +
character (which replaces the international
access code), and enter the country code, area
code (omit the leading zero if necessary), and
phone number. The character + as a replacement
for the international access code may not work
in all regions. In this case, enter the international
access code directly.
2. To make the call, press the call key.
3. To end the call (or to cancel the call attempt),
press the end key.
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, press
Contacts. Scroll to the desired name, or enter the
first letters of the name to the search field. To call
the contact, press the call key. If you have saved
several numbers for a contact, select the desired
number from the list, and press the call key.

Options during a call

To adjust the volume during a call, use the volume
key on the side of your device. You can also use the
scroll key. If you have set the volume to Mute, select
Unmute
To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options
can edit the message and change the recipient
before sending. Press the call key to send the file to
a compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select
switch between the active and the held call, select
Options
To send DTMF tone strings (for example, a
password), select
DTMF string or search for it in Contacts. To enter a
, and select
wait character (w) or a pause character (p), press *
repeatedly. To send the tone, select OK. You can add
DTMF tones to the phone number or DTMF fields in
a contact card.
first.
Send MMS (in UMTS networks only). You
>
Options
> Swap.
Options Send
>
> Hold. To
DTMF. Enter the
129