Specify Dhcp Server Settings - TP-Link RE450 User Manual

Chapter 3
5. Click Save.
3. 4.

Specify DHCP Server Settings

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and
the extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client
devices from the IP Address Pool. You can change the settings of the DHCP Server if
necessary.
1. Visit http://tplinkextender.net, and log in with the username and password you set for
the extender.
2. Go to Settings > Network.
¾ To specify the IP address that the extender assigns:
1. Select Auto (recommended) or
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
and is the same as the LAN IP address of the extender.
4. Click Save.
On to enable the DHCP Server.
IP Address
Default Gateway
Customize Your Network
Pool.
is automatically filled in
16