4
removing the
traveltot car seat
using the raincover
22
in use • durante su utilización
Press the release buttons on either side of the
car seat and lift it away from the adaptors.
Presione los botones de desbloqueo situados
a cada lado de la silla de auto y retírela de
los adaptadores.
The Weathershield™ can be fitted when the
pushchair is in seat or pram mode.
Check that the Weathershield™ has been
completely unfolded before fitting. Put the
hood into the most upright position, place the
Weathershield™ over the hood and arrange
it to cover the seat or pram unit as shown.
Ensure that the Weathershield™ is fitted
over the footrest section of the pushchair by
pulling the elastic over the edge of the seat
unit. There is a zip opening at the front of the
Weathershield™ to allow for easy access to
your child.
Note: The Weathershield™ is not designed
to be used with the traveltot car seat on the
chassis.
El Weathershield™ puede utilizarse cuando el
cochecito esté en modo cuco o en modo silla
de paseo.
cómo retirar la silla de
cómo utilizar el impermeable
auto travel tot
Need help?
Do you have a question about the my4 and is the answer not in the manual?
Questions and answers